STM中,如何提取串口数据里面的0x13里面的13
时间: 2024-03-21 22:38:21 浏览: 18
在STM中,可以使用串口中断来接收串口数据,并使用数组来缓存接收到的数据。具体方法如下:
```c
#include "stm32f10x.h"
#include <stdio.h>
#define BUFFER_SIZE 1024
uint8_t buffer[BUFFER_SIZE];
uint16_t buffer_index = 0;
void USART1_IRQHandler(void)
{
if (USART_GetITStatus(USART1, USART_IT_RXNE) != RESET)
{
uint8_t data = USART_ReceiveData(USART1);
buffer[buffer_index++] = data;
if (buffer_index >= BUFFER_SIZE)
{
buffer_index = 0;
}
if (data == 0x13)
{
printf("Received data: %d\n", buffer[buffer_index - 1]);
}
}
}
int main()
{
// 初始化串口
USART_InitTypeDef USART_InitStructure;
USART_StructInit(&USART_InitStructure);
USART_InitStructure.USART_BaudRate = 115200;
USART_InitStructure.USART_WordLength = USART_WordLength_8b;
USART_InitStructure.USART_StopBits = USART_StopBits_1;
USART_InitStructure.USART_Parity = USART_Parity_No;
USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
USART_Init(USART1, &USART_InitStructure);
USART_ITConfig(USART1, USART_IT_RXNE, ENABLE);
USART_Cmd(USART1, ENABLE);
// 启用串口中断
NVIC_InitTypeDef NVIC_InitStructure;
NVIC_InitStructure.NVIC_IRQChannel = USART1_IRQn;
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
NVIC_Init(&NVIC_InitStructure);
while (1)
{
// 主循环中可以执行其他任务
}
}
```
在上述代码中,USART1_IRQHandler是串口中断处理函数,可以在其中处理接收到的数据。将接收到的数据存储到buffer数组中,并记录当前存储的位置(buffer_index)。如果接收到的数据为0x13,则表示已经接收完一个完整的数据包,可以从buffer数组中读取上一个存储位置(buffer_index-1)中的数据,并进行处理。上述代码使用printf函数将提取到的13进行了输出,可以根据实际需求对数据进行处理。