GPIO_InitStructure.GPIO_Speed = GPIO_Speed_100MHz; 什么意思
时间: 2023-12-07 07:03:31 浏览: 60
引用\[1\]中的代码是一个按键初始化函数,其中GPIO_InitStructure.GPIO_Speed = GPIO_Speed_100MHz;这一行代码是设置GPIO的速度为100MHz。在STM32中,GPIO的速度可以设置为不同的值,用于控制IO口的输出速度。速度越高,IO口的切换速度越快。GPIO_Speed_100MHz表示将IO口的速度设置为100MHz。
#### 引用[.reference_title]
- *1* *2* *3* [ 1 // 使能对应的 GPIO 时钟 GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9 | GPIO_Pin_10;//LED 对应引脚 2 /...](https://blog.csdn.net/weixin_39963174/article/details/114489357)[target="_blank" data-report-click={"spm":"1018.2226.3001.9630","extra":{"utm_source":"vip_chatgpt_common_search_pc_result","utm_medium":"distribute.pc_search_result.none-task-cask-2~all~insert_cask~default-1-null.142^v91^control_2,239^v3^insert_chatgpt"}} ] [.reference_item]
[ .reference_list ]
相关问题
将这一段配置改写成HAL库语句 GPIO_InitTypeDef GPIO_InitStructure ; RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOD|RCC_AHB1Periph_GPIOE, ENABLE); GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0| GPIO_Pin_1| GPIO_Pin_2| GPIO_Pin_3| GPIO_Pin_4| GPIO_Pin_5| GPIO_Pin_6| GPIO_Pin_7| GPIO_Pin_8| GPIO_Pin_9| GPIO_Pin_10| GPIO_Pin_11| GPIO_Pin_12; GPIO_InitStructure.GPIO_Speed = GPIO_Speed_100MHz; GPIO_InitStructure.GPIO_Mode =GPIO_Mode_IN; GPIO_InitStructure.GPIO_OType = GPIO_OType_PP; GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP; GPIO_Init(GPIOD ,&GPIO_InitStructure); GPIO_InitStructure.GPIO_Pin = GPIO_Pin_7; GPIO_InitStructure.GPIO_Speed = GPIO_Speed_100MHz; GPIO_InitStructure.GPIO_Mode =GPIO_Mode_OUT; GPIO_InitStructure.GPIO_OType = GPIO_OType_PP; GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP; GPIO_Init(GPIOE ,&GPIO_InitStructure);
使用 HAL 库来配置上述代码,你可以将其改写为以下形式:
```c
GPIO_InitTypeDef GPIO_InitStructure;
/* 使能 GPIOD 和 GPIOE 的时钟 */
__HAL_RCC_GPIOD_CLK_ENABLE();
__HAL_RCC_GPIOE_CLK_ENABLE();
/* 配置 GPIOD */
GPIO_InitStructure.Pin = GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_2 | GPIO_PIN_3 | GPIO_PIN_4 | GPIO_PIN_5 | GPIO_PIN_6 |
GPIO_PIN_7 | GPIO_PIN_8 | GPIO_PIN_9 | GPIO_PIN_10 | GPIO_PIN_11 | GPIO_PIN_12;
GPIO_InitStructure.Mode = GPIO_MODE_INPUT;
GPIO_InitStructure.Pull = GPIO_PULLUP;
HAL_GPIO_Init(GPIOD, &GPIO_InitStructure);
/* 配置 GPIOE */
GPIO_InitStructure.Pin = GPIO_PIN_7;
GPIO_InitStructure.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStructure.Speed = GPIO_SPEED_FREQ_HIGH;
HAL_GPIO_Init(GPIOE, &GPIO_InitStructure);
```
在这个例子中,我们首先使用 `__HAL_RCC_GPIOx_CLK_ENABLE()` 函数使能 GPIOD 和 GPIOE 的时钟。然后,我们定义了一个名为 `GPIO_InitStructure` 的结构体变量,用于配置 GPIOD 和 GPIOE 的引脚。我们分别对 GPIOD 和 GPIOE 的引脚、模式、上拉/下拉和速度进行赋值。最后,通过调用 `HAL_GPIO_Init()` 函数来进行引脚的初始化,传入相应的 GPIO 口和结构体变量的指针作为参数。
void Matrix_ssKey_Pin_Init(void)//目前代码为PA0-2,PA3,PA12-15 { GPIO_InitTypeDef GPIO_InitStructure; RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOA, ENABLE); GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT; GPIO_InitStructure.GPIO_OType = GPIO_OType_PP; GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0 | GPIO_Pin_1 | GPIO_Pin_2 | GPIO_Pin_4;//没找到PA3引脚需要的话可以改 GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP; GPIO_InitStructure.GPIO_Speed = GPIO_Speed_100MHz; GPIO_Init(GPIOA,&GPIO_InitStructure); GPIO_InitStructure.GPIO_Pin = GPIO_Pin_12 | GPIO_Pin_11 | GPIO_Pin_10 | GPIO_Pin_9;//需要上拉 GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN; GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP; // GPIO_InitStructure.GPIO_Speed = GPIO_Speed_100MHz; GPIO_Init(GPIOA,&GPIO_InitStructure); } 无法执行该段函数 芯片为stm32f407zgt6且无报错
这段代码是用于初始化STM32F407ZGT6芯片上的GPIO引脚。根据代码中的注释,该函数将PA0、PA1、PA2、PA4设置为输出模式,而PA9、PA10、PA11、PA12设置为输入模式,并且需要上拉。
在您提供的信息中,没有指明无法执行的具体原因或报错信息。如果您遇到无法执行该函数的问题,可能有以下几个方面需要检查:
1. 确保在调用该函数之前已经包含了正确的头文件,例如"stm32f4xx.h"。
2. 检查是否正确配置了芯片的时钟,确保已经启用了GPIOA的时钟。
3. 检查是否正确初始化了GPIOA引脚所对应的管脚号,确保没有使用错误的引脚。
4. 如果经过以上检查仍然无法执行该函数,并且没有报错信息,可以尝试使用调试器来跟踪代码执行过程,以确定具体出错的位置。
请提供更多的信息,例如具体的错误信息或其他相关代码,以便更准确地帮助您解决问题。