![](https://csdnimg.cn/release/download_crawler_static/10873061/bg3.jpg)
EVAL-AD7605-4SDZ/EVAL-AD7606SDZ/EVAL-AD7607SDZ/EVAL-AD7608SDZ User Guide
UG-851
Rev. A | Page 3 of 15
QUICK START GUIDE
Follow these steps to quickly evaluate the AD7606/AD7606-6/
AD7606-4, AD7607, AD7608, and AD7605-4 ADCs. For detailed
instructions, see the subsequent sections.
1. Install the evaluation software from the AD7606/AD7606-6/
AD7606-4, AD7607, AD7608, and AD7605-4 product pages
or from the CD included in the evaluation kit. Ensure the
EVAL-SDP-CB1Z SDP board is disconnected from the USB
port of the PC while installing the software. The PC may
need to be restarted after the installation.
2. Ensure the various link options are configured as outlined
in Table 3.
3. Connect the EVAL-SDP-CB1Z SDP board to the
evaluation board as shown in Figure 1. Screw the EVAL-
SDP-CB1Z SDP board and EVAL-AD7605-4SDZ/EVAL-
AD7606SDZ/EVAL-AD7606-6SDZ/EVAL-AD7606-4SDZ/
EVAL-AD7607SDZ/EVAL-AD7608SDZ evaluation board
together using the enclosed nylon screw/nut kit to ensure
the boards connect firmly together.
4. Connect a 5 V power supply to the J1 connector and
ensure Link LK1 is in Position A.
5. Connect the EVAL-SDP-CB1Z SDP board to the PC via
the USB cable. Choose to automatically search for the drivers
for the SDP board if prompted by the operating system.
6. Launch the evaluation software from the Analog Devices
subfolder in the Programs menu.
7. Connect an input signal via the V1 to V8 terminal blocks.
Figure 1. Evaluation Board (Left) Connected to the SDP Board (Right)
13283-002
J1
V1 TO V8
LK1