![](https://csdnimg.cn/release/download_crawler_static/87108086/bg7.jpg)
P650HVN02.6 Product Specification
Rev. 0.0
© Copyright AU Optronics Corp. 2013 All Rights Reserved. Page 7 / 32
Note :
1. T V
DD
= 12.0V, Fv = 60Hz, Fclk= Max freq. , 25
℃
, Test Pattern : White Pattern
>> refer to “Section:3.3 Signal Timing Specification, Typical timing”
2. Measurement condition : Rising time = 400us
GND
GNDGND
GND
V
VV
V
DD
DDDD
DD
10%
90%
400
400400
400
3. Test Condition:
(1) The measure point of V
RP
is in LCM side after connecting the System Board and LCM.
(2) Under Max. Input current spec. condition.
4. V
ICM
= 1.25V
V
T H
V
T L
|V
ID
|
V
IC M
G N D
0 V
|V
ID
|
|V
ID
|
L V D S -
L V D S +
5. The measure points of V
IH
and V
IL
are in LCM side after connecting the System Board and LCM.
6. The relative humidity must not exceed 80% non-condensing at temperatures of 40 or less. At
℃
temperatures greater than 40 , the wet bulb temperature must not exceed 39 . When operat
℃ ℃
ing at low
temperatures, the brightness of LED will drop and the life time of LED will be reduced.
7. The lifetime (MTTF) is defined as the time which luminance of LED is 50% compared to its original value.
[Operating condition: Continuous operating at Ta = 25±2
℃
]
8.
Input Channel Pair Skew Margin