CRITICAL:root:twint.get:User:'NoneType' object is not subscriptable
时间: 2023-12-21 08:31:20 浏览: 28
根据提供的引用内容,"CRITICAL:root:twint.get:User:'NoneType' object is not subscriptable" 错误是由 Twint 库中的一个问题引起的。这个错误通常发生在使用 Twint 库时,当尝试获取用户信息时,返回的结果为空值(NoneType),而空值是不可索引的,因此会导致该错误。
解决这个问题的方法是确保你提供的用户信息是有效的,并且确保你的代码正确地使用了 Twint 库的功能。你可以尝试以下方法来解决这个问题:
1. 确保你已经安装了最新版本的 Twint 库。你可以使用以下命令来更新 Twint 库:
```shell
pip3 install --user --upgrade git+https://github.com/twintproject/twint.git@origin/master#egg=twint
```
2. 检查你的代码中是否正确地使用了 Twint 库的功能。确保你提供的用户信息是有效的,并且你正确地使用了 Twint 库中的函数和方法。
3. 如果问题仍然存在,你可以尝试查看 Twint 库的文档或寻求 Twint 社区的帮助,以获取更多关于这个问题的解决方法。
相关问题
ModuleNotFoundError: No module named 'twint'
这个错误提示表明你的 Python 环境中缺少了 `twint` 模块。`twint***:
1. 确保你已经安装了 `twint` 模块。可以使用以下命令来安装 `twint`:
```
pip install twint
```
2. 如果你已经安装了 `twint`,但仍然出现该错误,可能是因为你的 Python 环境没有正确地配置。你可以尝试重新安装 `twint` 模块,并确保你的 Python 版本和环境符合 `twint` 的要求。
3. 如果你在 Jupyter Notebook 上使用 `twint`,请确保你在正确的环境中运行该代码,并且已经执行了 `!pip install twint` 命令来安装 `twint` 模块。
如果以上方法仍然无法解决问题,你可以提供更多关于你的环境和代码的信息,以便我能够更具体地帮助你解决问题。
Please write a C language file that will write a group of numbers into eeprom as a digital IC designer. I hope this C language file is general and detaile
Sure, here's an example C program that demonstrates how to write a group of numbers into the EEPROM memory using the I2C protocol. This code is written for the ATmega328P microcontroller, but it can be easily adapted for other microcontrollers.
```c
#include <avr/io.h>
#include <util/delay.h>
#include <avr/eeprom.h>
#include <avr/interrupt.h>
#define SLAVE_ADDR 0xA0 // Slave device address
void i2c_init(void) {
TWSR = 0x00; // Set prescaler to 1
TWBR = ((F_CPU / 100000UL) - 16) / 2; // Set bit rate generator
TWCR = (1 << TWEN); // Enable I2C module
}
void i2c_start(void) {
TWCR = (1 << TWINT) | (1 << TWSTA) | (1 << TWEN);
while (!(TWCR & (1 << TWINT)));
}
void i2c_stop(void) {
TWCR = (1 << TWINT) | (1 << TWSTO) | (1 << TWEN);
}
void i2c_write(uint8_t data) {
TWDR = data;
TWCR = (1 << TWINT) | (1 << TWEN);
while (!(TWCR & (1 << TWINT)));
}
void eeprom_write(uint16_t addr, uint8_t data) {
i2c_start();
i2c_write(SLAVE_ADDR | ((addr >> 8) & 0x07));
i2c_write(addr & 0xFF);
i2c_write(data);
i2c_stop();
_delay_ms(10);
}
int main(void) {
uint16_t addr = 0x0000; // Starting address in EEPROM
uint8_t data[] = {0x01, 0x02, 0x03, 0x04, 0x05}; // Data to be written
cli(); // Disable interrupts
i2c_init(); // Initialize I2C module
for (int i = 0; i < sizeof(data); i++) {
eeprom_write(addr++, data[i]); // Write data to EEPROM
}
sei(); // Enable interrupts
return 0;
}
```
In this code, the `i2c_init()` function initializes the I2C module, `i2c_start()` and `i2c_stop()` functions send start and stop signals respectively, `i2c_write()` function writes data to the I2C bus, and `eeprom_write()` function writes a byte of data to the EEPROM memory at a specified address.
You can modify this code to write any group of numbers to the EEPROM memory. Just update the `data` array with your desired numbers and adjust the `addr` variable to point to the starting address in EEPROM where you want to write the data.