while(UART_SR&0x40!)
时间: 2024-03-18 12:39:52 浏览: 23
这段代码可能有语法错误,应该是 while(!(UART_SR & 0x40))。
这段代码的作用是等待串口发送数据。其中,UART_SR 是一个代表串口状态寄存器的变量,& 0x40 是对状态寄存器进行位运算,得到状态寄存器的第 6 位(也就是 TXE 位),用于判断是否可以发送数据。如果 TXE 位为 1,表示可以发送数据,条件 !(UART_SR & 0x40) 为假,while 循环结束;如果 TXE 位为 0,表示不能发送数据,条件 !(UART_SR & 0x40) 为真,while 循环继续等待发送数据。
常见的用法是在单片机中使用串口发送数据,以便进行通信或控制。例如,下面是一个使用串口发送数据的例子:
```c
while(1) {
// 等待可以发送数据
while(!(UART_SR & 0x40));
// 发送数据
UART_DR = data;
// 等待发送完成
while(!(UART_SR & 0x80));
}
```
其中,UART_DR 是一个代表串口数据寄存器的变量,用于存储要发送的数据。在发送数据前,需要等待 TXE 位为 1,表示可以发送数据;发送数据后,需要等待 TC 位为 1,表示发送完成。
相关问题
while (!(UART1_SR & 0x40))
这是一段 C 语言代码,用于等待串口接收数据。
其中,UART1_SR 是一个代表串口状态寄存器的变量,& 0x40 是对状态寄存器进行位运算,得到状态寄存器的第 6 位(也就是 RXNE 位),用于判断是否有接收到数据。如果 RXNE 位为 1,表示接收到了数据,条件 !(UART1_SR & 0x40) 为假,while 循环结束;如果 RXNE 位为 0,表示没有接收到数据,条件 !(UART1_SR & 0x40) 为真,while 循环继续等待接收数据。
具体来说,这段代码的作用是等待串口接收数据,并且在接收到数据后再继续执行后面的代码。常见的用法是在单片机中使用串口接收数据,以便进行通信或控制。例如,下面是一个使用串口接收数据的例子:
```c
while(1) {
// 等待接收数据
while (!(UART1_SR & 0x40));
// 读取接收到的数据
char data = UART1_DR;
// 处理接收到的数据
// ...
}
```
其中,UART1_DR 是一个代表串口数据寄存器的变量,用于存储接收到的数据。在接收到数据后,可以从 UART1_DR 变量中读取数据,并进行后续的处理。
int fputc(int ch, FILE *p) { while((USART1->SR & 0x40)==0); USART1->DR=ch; return ch; }作用
& 0x80) == 0); USART1->DR = (ch & 0xFF); return ch; }
This is a function that writes a single character (represented by the integer "ch") to a file (represented by the pointer "p") using USART1 (a Universal Synchronous/Asynchronous Receiver/Transmitter).
The function first checks the status register (SR) of USART1 to see if it is ready to transmit data. It does this by checking if the transmit data register is empty (the 7th bit of the SR is set to 1).
If the transmit data register is not empty, the function waits in a loop until it is (by repeatedly checking the SR). Once the transmit data register is empty, the function writes the character to the data register (DR) of USART1, which is then transmitted over the UART.
Finally, the function returns the character that was written to the file.