linux查看串口数据,十六进制
时间: 2023-08-11 13:14:11 浏览: 226
在Linux系统中,可以使用minicom或者screen等串口工具来查看串口数据,也可以使用cat命令将串口数据输出到终端。如果需要以十六进制形式查看串口数据,可以使用hexdump命令或者xxd命令。具体步骤如下:
1. 确认串口设备文件名,比如/dev/ttyS1。
2. 打开串口设备,设置波特率、数据位、停止位、校验位等参数。
3. 使用cat命令输出串口数据,并使用管道符将输出结果传递给hexdump或者xxd命令,命令格式为:
```
cat /dev/ttyS1 | hexdump -C
```
或者
```
cat /dev/ttyS1 | xxd -c 16 -g 1
```
其中,-C选项表示以十六进制和ASCII码的形式输出,-c选项表示每行输出的字节数,-g选项表示每个字节占用的字节数。
注意,在使用cat命令输出串口数据时,需要在终端窗口中按下Ctrl+C键来停止输出。
相关问题
树莓派Linux C串口发送十六进制数
在树莓派Linux环境下,可以使用C语言的串口API来发送十六进制数。具体步骤如下:
1. 打开串口设备文件。
```c
int fd = open("/dev/ttyS0", O_WRONLY | O_NOCTTY);
if (fd == -1) {
perror("open");
exit(1);
}
```
其中`/dev/ttyS0`是串口设备文件名,`O_WRONLY`表示以只写方式打开文件,`O_NOCTTY`表示不将串口设备作为控制终端。
2. 配置串口参数。
```c
struct termios options;
tcgetattr(fd, &options);
cfsetispeed(&options, B9600); // 设置波特率为9600
cfsetospeed(&options, B9600);
options.c_cflag &= ~PARENB; // 禁用奇偶校验
options.c_cflag &= ~CSTOPB; // 设置停止位为1
options.c_cflag &= ~CSIZE; // 设置数据位为8
options.c_cflag |= CS8;
options.c_cflag &= ~CRTSCTS; // 禁用硬件流控制
options.c_lflag &= ~(ICANON | ECHO | ECHOE | ISIG); // 禁用规范模式和回显
tcsetattr(fd, TCSANOW, &options);
```
3. 发送十六进制数。
```c
unsigned char data[] = {0x12, 0x34};
int len = write(fd, data, sizeof(data));
if (len == -1) {
perror("write");
}
```
其中`data`是要发送的数据,`sizeof(data)`是数据长度。`write`函数将数据写入串口设备文件,返回写入的字节数。如果返回值为-1,则表示发送失败。
4. 关闭串口设备文件。
```c
close(fd);
```
完整的代码示例如下:
```c
#include <stdio.h>
#include <stdlib.h>
#include <fcntl.h>
#include <termios.h>
#include <unistd.h>
int main() {
int fd = open("/dev/ttyS0", O_WRONLY | O_NOCTTY);
if (fd == -1) {
perror("open");
exit(1);
}
struct termios options;
tcgetattr(fd, &options);
cfsetispeed(&options, B9600);
cfsetospeed(&options, B9600);
options.c_cflag &= ~PARENB;
options.c_cflag &= ~CSTOPB;
options.c_cflag &= ~CSIZE;
options.c_cflag |= CS8;
options.c_cflag &= ~CRTSCTS;
options.c_lflag &= ~(ICANON | ECHO | ECHOE | ISIG);
tcsetattr(fd, TCSANOW, &options);
unsigned char data[] = {0x12, 0x34};
int len = write(fd, data, sizeof(data));
if (len == -1) {
perror("write");
}
close(fd);
return 0;
}
```
注意,如果要发送多个十六进制数,可以将它们存储在一个数组中,然后一次性发送。
linux串口输出十六进制编程
在 Linux 中,可以使用 C 语言中的串口读写函数和十六进制转换函数来实现串口输出十六进制编码的功能。下面是一个示例程序:
```c
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <fcntl.h>
#include <termios.h>
#include <unistd.h>
#define SERIAL_PORT "/dev/ttyS0" // 串口设备文件路径
int main(void) {
int fd;
struct termios options;
// 打开串口
fd = open(SERIAL_PORT, O_RDWR | O_NOCTTY | O_NDELAY);
if (fd < 0) {
perror("open");
return -1;
}
// 配置串口
tcgetattr(fd, &options);
cfsetispeed(&options, B9600);
cfsetospeed(&options, B9600);
options.c_cflag &= ~PARENB;
options.c_cflag &= ~CSTOPB;
options.c_cflag &= ~CSIZE;
options.c_cflag |= CS8;
options.c_cflag &= ~CRTSCTS;
options.c_cflag |= CREAD | CLOCAL;
options.c_iflag &= ~(IXON | IXOFF | IXANY);
options.c_iflag &= ~(ICANON | ECHO | ECHOE | ISIG);
options.c_oflag &= ~OPOST;
options.c_lflag &= ~(ICANON | ECHO | ECHOE | ISIG);
options.c_cc[VMIN] = 1;
options.c_cc[VTIME] = 0;
tcsetattr(fd, TCSANOW, &options);
// 发送十六进制数据
char hex_str[] = "1a2b3c4d5e";
unsigned char hex_data[6];
int i;
for (i = 0; i < 6; i++) {
sscanf(hex_str + i * 2, "%2hhx", &hex_data[i]);
}
write(fd, hex_data, 6);
// 关闭串口
close(fd);
return 0;
}
```
在上面的示例程序中,首先定义了串口设备文件路径 `SERIAL_PORT`,然后通过 `open` 函数打开串口设备文件并设置相关属性。接着,将需要发送的十六进制字符串转换为十六进制数据并通过 `write` 函数发送出去。最后,通过 `close` 函数关闭串口。