void sd_bus_error_free( sd_bus_error *e);

时间: 2023-08-11 14:03:37 浏览: 157

thl_r16_tinav2.0_hm1375验证通过_增加打印设备ID_20170824_1447.7z

4星 · 用户满意度95%

全志R16平台的tinav2.0系统下调通HM1375 2017/8/24 14:04 开发板：SC3817R OS：tina V2.0 1、最新的驱动程序请直接联系HiMax原厂/代理商！ R:\wyb\thl_r16_tinav2.0_hm1375\lichee\linux-3.4\drivers\media\video\sunxi-vfe\device\hm1375.c 2、 R:\wyb\thl_r16_tinav2.0_hm1375\lichee\linux-3.4\drivers\media\video\sunxi-vfe\device\Makefile EXTRA_LDFLAGS += --strip-debug ifneq ($(strip $(CONFIG_ARCH_SUN8IW8)),) obj-$(CONFIG_OV2710_MIPI)+= ov2710_mipi.o obj-$(CONFIG_OV4689)+= ov4689.o obj-$(CONFIG_OV4689_60FPS)+= ov4689_60fps.o obj-$(CONFIG_AR0330_MIPI)+= ar0330_mipi.o obj-$(CONFIG_OV4689_SDV)+= ov4689_sdv.o obj-$(CONFIG_GC1004_MIPI)+= gc1004_mipi.o obj-$(CONFIG_H22_MIPI)+= h22_mipi.o obj-$(CONFIG_NT99231_MIPI)+= nt99231_mipi.o else obj-m+= hm1375.o #obj-m+= ov5640.o #obj-m+= ov2640.o #obj-m+= ov7736.o #obj-m+= s5k4ec.o #obj-m+= s5k4ec_mipi.o #obj-m+= gc2035.o #obj-m+= gt2005.o #obj-m+= gc0307.o #obj-m+= gc0308.o #obj-m+= gc0328.o #obj-m+= gc0328c.o #obj-m+= gc0329.o #obj-m+= gc0311.o #obj-m+= hi253.o #obj-m+= sp2518.o #obj-m+= sp2519.o #obj-m+= sp0718.o #obj-m+= sp0838.o #obj-m+= ov16825.o #obj-m+= ov5650.o #obj-m+= ov5647.o #obj-m+= ov5647_mipi.o #obj-m+= t8et5.o #obj-m+= s5k4e1.o #obj-m+= s5k4e1_mipi.o #obj-m+= sp2518.o #obj-m+= sp0718.o #obj-m+= gc5004.o #obj-m+= gc5004_mipi.o #obj-m+= ov5648.o #obj-m+= ar0330.o #obj-m+= ov5648.o #obj-m+= sp5408.o #obj-m+= ov12830.o #obj-m+= ov8825.o #obj-m+= ov8850.o #obj-m+= gc2155.o #obj-m+= gc2145.o #obj-m+= gc2145d.o #obj-m+= ov8858.o #obj-m+= ov13850.o #obj-m+= imx214.o #obj-m+= ov8858_4lane.o #obj-m+= sp5409.o #obj-m+= s5k5e2yx.o #obj-m+= ov2710_mipi.o #obj-m+= siv121d.o #obj-m+= ov2710_mipi.o #obj-m+= bg0703.o #obj-m+= gc1014_mipi.o #obj-m+= imx219.o #obj-m+= imx224.o #obj-m+= imx322.o #obj-m+= ov8858_r2a_4lane.o #obj-m+= ov8865_4lane.o #obj-m+= ps1210.o #obj-m+= imx291.o endif 3、让tinav2.0启动之后不让摄像头camera休眠： R:\wyb\thl_r16_tinav2.0_hm1375\lichee\linux-3.4\drivers\media\video\sunxi-vfe\vfe.c static void probe_work_handle(struct work_struct *work) { struct vfe_dev *dev= container_of(work, struct vfe_dev, probe_work.work); int ret = 0; int input_num; int device_valid_count = 0; struct video_device *vfd; char vfe_name[16] = {0}; mutex_lock(&probe_hdl_lock); vfe_print("probe_work_handle start!\n"); vfe_dbg(0,"v4l2_device_register\n"); #ifdef USE_SPECIFIC_CCI vfe_clk_open(dev); #endif /* v4l2 device register */ ret = v4l2_device_register(&dev->pdev->dev, &dev->v4l2_dev); if (ret) { vfe_err("Error registering v4l2 device\n"); goto probe_hdl_free_dev; } dev_set_drvdata(&dev->pdev->dev, (dev)); vfe_dbg(0,"v4l2 subdev register\n"); /* v4l2 subdev register */ dev->is_same_module = 0; for(input_num=0; input_num<dev->dev_qty; input_num++) { vfe_print("v4l2 subdev register input_num = %d\n",input_num); if(!strcmp(dev->ccm_cfg[input_num]->ccm,"")) { vfe_err("Sensor name is NULL!\n"); goto snesor_register_end; } if(dev->is_same_module) { dev->ccm_cfg[input_num]->sd = dev->ccm_cfg[input_num-1]->sd; vfe_dbg(0,"num = %d , sd_0 = %p,sd_1 = %p\n",input_num,dev->ccm_cfg[input_num]->sd,dev->ccm_cfg[input_num-1]->sd); goto snesor_register_end; } if((dev->dev_qty > 1) && (input_num+1<dev->dev_qty)) { if((!strcmp(dev->ccm_cfg[input_num]->ccm,dev->ccm_cfg[input_num+1]->ccm))) dev->is_same_module = 1; } if(dev->vip_define_sensor_list == 1) { if(dev->ccm_cfg[input_num]->sensor_cfg_ini->power_settings_enable == 1) { cpy_ccm_power_settings(dev->ccm_cfg[input_num]); } } #ifdef _REGULATOR_CHANGE_ #else if(vfe_device_regulator_get(dev->ccm_cfg[input_num])) { vfe_err("vfe_device_regulator_get error at input_num = %d\n",input_num); goto snesor_register_end; } #endif vfe_print("vfe sensor detect start! input_num = %d\n",input_num); dev->input = input_num; if(vfe_sensor_register_check(dev,&dev->v4l2_dev,dev->ccm_cfg[input_num],&dev->dev_sensor[input_num],input_num) == NULL) { vfe_err("vfe sensor register check error at input_num = %d\n",input_num); dev->device_valid_flag[input_num] = 0; //goto snesor_register_end; } else{ dev->device_valid_flag[input_num] = 1; device_valid_count ++; } if(dev->ccm_cfg[input_num]->is_isp_used && dev->ccm_cfg[input_num]->is_bayer_raw) { if(read_ini_info(dev,input_num, "/system/etc/hawkview/")) { vfe_warn("read ini info fail\n"); } } if(dev->ccm_cfg[input_num]->act_used == 1) { dev->dev_act[input_num].addr = (unsigned short)(dev->ccm_cfg[input_num]->act_slave>>1); strcpy(dev->dev_act[input_num].type,dev->ccm_cfg[input_num]->act_name); if(vfe_actuator_subdev_register(dev,dev->ccm_cfg[input_num], &dev->dev_act[input_num]) != 0) ;//goto probe_hdl_free_dev; } snesor_register_end: vfe_dbg(0,"dev->ccm_cfg[%d] = %p\n",input_num,dev->ccm_cfg[input_num]); vfe_dbg(0,"dev->ccm_cfg[%d]->sd = %p\n",input_num,dev->ccm_cfg[input_num]->sd); vfe_dbg(0,"dev->ccm_cfg[%d]->power.iovdd = %p\n",input_num,dev->ccm_cfg[input_num]->power.iovdd); vfe_dbg(0,"dev->ccm_cfg[%d]->power.avdd = %p\n",input_num,dev->ccm_cfg[input_num]->power.avdd); vfe_dbg(0,"dev->ccm_cfg[%d]->power.dvdd = %p\n",input_num,dev->ccm_cfg[input_num]->power.dvdd); vfe_dbg(0,"dev->ccm_cfg[%d]->power.afvdd = %p\n",input_num,dev->ccm_cfg[input_num]->power.afvdd); } dev->input = -1; /*video device register */ ret = -ENOMEM; vfd = video_device_alloc(); if (!vfd) { goto probe_hdl_unreg_dev; } *vfd = vfe_template[dev->id]; vfd->v4l2_dev = &dev->v4l2_dev; sprintf(vfe_name,"vfe-%d",dev->id); dev_set_name(&vfd->dev, vfe_name); if (0 != device_valid_count) { ret = video_register_device(vfd, VFL_TYPE_GRABBER, dev->id); if (ret < 0) { goto probe_hdl_rel_vdev; } } video_set_drvdata(vfd, dev); /*add device list*/ /* Now that everything is fine, let's add it to device list */ list_add_tail(&dev->devlist, &devlist); dev->vfd = vfd; vfe_print("V4L2 device registered as %s\n",video_device_node_name(vfd)); /*initial video buffer queue*/ videobuf_queue_dma_contig_init(&dev->vb_vidq, &vfe_video_qops, NULL, &dev->slock, V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_NONE,//default format, can be changed by s_fmt sizeof(struct vfe_buffer), dev,NULL); ret = sysfs_create_group(&dev->pdev->dev.kobj, &vfe_attribute_group); #ifdef CONFIG_ES dev->early_suspend.level = EARLY_SUSPEND_LEVEL_DISABLE_FB + 1; dev->early_suspend.suspend = vfe_early_suspend; dev->early_suspend.resume = vfe_late_resume; // [hawkview_err]xxxxcan't open /dev/video0(Resource temporarily unavailable) // 2016/10/25 14:33 wenyuanbo cloase suspend. // register_early_suspend(&dev->early_suspend); vfe_print("register_early_suspend @ probe handle!\n"); #endif #ifdef USE_SPECIFIC_CCI vfe_clk_close(dev); #endif vfe_print("probe_work_handle end!\n"); mutex_unlock(&probe_hdl_lock); return ; probe_hdl_rel_vdev: video_device_release(vfd); vfe_print("video_device_release @ probe_hdl!\n"); probe_hdl_unreg_dev: vfe_print("v4l2_device_unregister @ probe_hdl!\n"); v4l2_device_unregister(&dev->v4l2_dev); probe_hdl_free_dev: vfe_print("vfe_resource_release @ probe_hdl!\n"); #ifdef USE_SPECIFIC_CCI csi_cci_exit_helper(dev->cci_sel); vfe_clk_close(dev); #endif //vfe_resource_release(dev); vfe_err("Failed to install at probe handle\n"); mutex_unlock(&probe_hdl_lock); return ; } 4、 R:\wyb\thl_r16_tinav2.0_hm1375\package\allwinner\cameratest\src\common\hawkview.c int fetch_sub_cmd(const char* buf,int buf_len,char** cmd,int* cmd_num,int lenght) { int i = 0,j = 0,n = 0; while(buf[i] != '#'){ //the sub cmd end by '#' while(buf[i] != 'x' && buf[i] != ':' && buf[i] != '#') { if((i+1) > buf_len) return 0; 修改为： if(i++ > buf_len) return 0; *((char*)cmd + n*lenght + j++) = buf[i++]; if(j > lenght) { hv_err("sub cmd over long\n"); *cmd_num = n + 1; return -1; } } *((char*)cmd + n*lenght + j++) = '\0'; n++; j = 0; if(buf[i] != '#'){ i++; } if(n > *cmd_num){ hv_err("the max cmd num is %d\n",*cmd_num); return -1; } } *cmd_num = n; return 0; } R:\wyb\thl_r16_tinav2.0_hm1375\package\allwinner\cameratest\src\common\video.c static int capture_frame(void* capture,int (*set_disp_addr)(int,int,unsigned int*),pthread_mutex_t* mutex) { capture_handle* cap = (capture_handle*)capture; int ret; int i; struct v4l2_buffer buf; enum v4l2_buf_type type; fd_set fds; struct timeval tv; pthread_mutex_lock(mutex); //used for cammand and status debug if (old_vi_cmd != cap->cmd){ hv_dbg("capture frame command %d --> %d\n",old_vi_cmd,cap->cmd); old_vi_cmd = (int)cap->cmd; } if(old_status != cap->status){ hv_dbg("capture frame status %d --> %d\n",old_status,cap->status); old_status = cap->status; } if(cap->status == OFF && cap->cmd == START_STREAMMING){ hv_dbg("capture start streaming\n"); type = V4L2_BUF_TYPE_VIDEO_CAPTURE; if (ioctl(videofh, VIDIOC_STREAMON, &type) == -1) { hv_err("VIDIOC_STREAMON error! %s\n",strerror(errno)); goto quit; } cap->status = ON; cap->cmd = COMMAND_UNUSED; pthread_mutex_unlock(mutex); return 0; } if(cap->status == ON && cap->cmd == STOP_STREAMMING){ hv_dbg("capture stop streaming\n"); type = V4L2_BUF_TYPE_VIDEO_CAPTURE; if(-1 == ioctl(videofh, VIDIOC_STREAMOFF, &type)){ hv_err("VIDIOC_STREAMOFF error! %s\n",strerror(errno)); goto quit; } cap->status = OFF; cap->cmd = COMMAND_UNUSED; capture_quit(capture); pthread_mutex_unlock(mutex); return 2; } if(cap->status == OFF) { pthread_mutex_unlock(mutex); return 0; } FD_ZERO(&fds); FD_SET(videofh, &fds); tv.tv_sec = 2; tv.tv_usec = 0; pthread_mutex_unlock(mutex); ret = select(videofh + 1, &fds, NULL, NULL, &tv); pthread_mutex_lock(mutex); //hv_dbg("select video ret: %d\n",ret); if (ret == -1) { if (errno == EINTR) { return 0; } hv_err("select error\n"); goto stream_off; } else if (ret == 0) { hv_err("select timeout\n"); pthread_mutex_unlock(mutex); return 0; } memset(&buf, 0, sizeof(struct v4l2_buffer)); buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; buf.memory = V4L2_MEMORY_MMAP; ret = ioctl(videofh, VIDIOC_DQBUF, &buf); if (ret == -1) { hv_err("VIDIOC_DQBUF failed!\n"); goto stream_off; } float framerate; framerate = get_framerate((long long)(buf.timestamp.tv_sec),(long long)(buf.timestamp.tv_usec)); if(framerate > 1.0){ cap->cap_fps = framerate; //hv_dbg("framerate: %0.2ffps\n",cap->cap_fps); } //sync capture info perp x second #define M_SECOND 200 if(is_x_msec(M_SECOND,(long long)(buf.timestamp.tv_sec),(long long)(buf.timestamp.tv_usec))){ getExifInfo(&(cap->frame.exif)); set_cap_info((void*)cap); 修改为： // set_cap_info((void*)cap); } if(cap->cmd == STOP_SAVE_FRAME && cap->save_status == ON) cap->save_status = OFF; //save frame , the frame will be get by PC Tool to preview on PC screen //frame format: /dev/frame_x (x:0~21) if(cap->cmd == SAVE_FRAME || cap->save_status == ON ) { if(cap->cmd == SAVE_FRAME){ cap->save_status = ON; cap->cmd = COMMAND_UNUSED; } ret = do_save_frame(capture,buf.index); } //take yuv image,it will save the target frame exif info in the same time //image name: xxxx (set by usered through command) //exif info name: xxxx.exif if(cap->cmd == SAVE_IMAGE ) { ret = 0;//getExifInfo(&(cap->picture.exif)); //get target frame exif info successfully then save the target image //if get the exif info fail,it will try next frame if(ret == 0){ buffers[buf.index].phy_addr = buf.m.offset - 0x20000000; hv_dbg("index: %d buffers[buf.index].start = %p\n",buf.index,buffers[buf.index].start); //do_save_image(capture,buf.index); do_save_sub_image(capture,buf.index); cap->cmd = COMMAND_UNUSED; } } //get display addr int w,h; unsigned int addr; get_disp_addr(capture, buf.m.offset,&addr,&w,&h); // set disp buffer if (set_disp_addr){ set_disp_addr(w,h,&addr); } ret = ioctl(videofh, VIDIOC_QBUF, &buf); if (ret == -1) { hv_err("VIDIOC_DQBUF failed!\n"); goto stream_off; } pthread_mutex_unlock(mutex); return 0; stream_off: hv_err("err stream off\n"); ioctl(videofh, VIDIOC_STREAMOFF, &type); quit: capture_quit(capture); pthread_mutex_unlock(mutex); return -1; } R:\wyb\thl_r16_tinav2.0_hm1375\package\allwinner\cameratest\src\common\video_helper.c int set_cap_info(void* capture) { char info[500]; char exif[500]; char file_path[20]; capture_handle* cap = (capture_handle*)capture; memset(info,0,sizeof(info)); strcpy(file_path,"dev/info"); 修改为： //strcpy(file_path, "dev/info"); sprintf(file_path, "%s/%s.info", PATH, cap->picture.path_name); //sync string: sensor_type:save_status:framrate:capture_w:capture_h,sub_w,sub_h# sprintf(info, \ "sensor_type = %s\n" \ "status = %d\n" \ "framerate = %0.2f\n" \ "subchanel_width = %d\n" \ "subchanel_height = %d\n" \ "rotation = %d\n\n", \ (cap->sensor_type == 1)?"raw":"yuv", \ cap->save_status, \ cap->cap_fps, \ cap->sub_w, \ cap->sub_h, \ cap->sub_rot); make_exif_info(exif,"none",&(cap->frame.exif),cap->cap_w,cap->cap_h); strcat(info,exif); //hv_dbg("info str:\n%s\n",info); return write_file(file_path,info,sizeof(info)); } int do_save_sub_image(void* capture,int buf_index) { int ret; char image_name[30]; capture_handle* cap = (capture_handle*)capture; memset(image_name,0,sizeof(image_name)); sprintf(image_name,"%s/%s", PATH,cap->picture.path_name); hv_dbg("image_name: %s\n",image_name); （建议增加这里） set_cap_info(capture); set_exif_info(capture); hv_dbg("--------set_exif_info end\n"); void* vir_sub_start = NULL; unsigned int phy_sub_start = 0; int w,h; if(cap->sensor_type == V4L2_SENSOR_TYPE_RAW){ vir_sub_start = (unsigned int)(buffers[buf_index].start) + ALIGN_4K(ALIGN_16B(cap->cap_w) * cap->cap_h * 3 >> 1); phy_sub_start = buffers[buf_index].phy_addr + ALIGN_4K(ALIGN_16B(cap->cap_w) * cap->cap_h * 3 >> 1); w = cap->sub_w; h = cap->sub_h; } else { vir_sub_start = buffers[buf_index].start; phy_sub_start = buffers[buf_index].phy_addr; w = cap->cap_w; h = cap->cap_h; } #ifdef ANDROID_ENV ret = save_jpeg_frame(image_name,phy_sub_start,w,h); //sprintf(image_name,"/data/camera/yuv%s", cap->picture.path_name); //ret = save_jpeg_frame_by_viraddr(image_name,(void*)vir_sub_start,cap->sub_w,cap->sub_h); #else sprintf(image_name,"%s/yuv%s", PATH,cap->picture.path_name); ret = save_frame_to_file(image_name, \ (void*)(vir_sub_start), \ w,h,cap->cap_fmt, \ 1); #endif if(ret == -1) hv_err("save image failed!\n"); return 0; } 5、可选增加fpscamera： R:\wyb\thl_r16_tinav2.0_hm1375\package\allwinner\fpscamera 6、 define KernelPackage/sunxi-vfe SUBMENU:=$(VIDEO_MENU) TITLE:=sunxi-vfe support FILES:=$(LINUX_DIR)/drivers/media/video/videobuf-core.ko FILES+=$(LINUX_DIR)/drivers/media/video/videobuf-dma-contig.ko FILES+=$(LINUX_DIR)/drivers/media/video/sunxi-vfe/csi_cci/cci.ko FILES+=$(LINUX_DIR)/drivers/media/video/sunxi-vfe/vfe_os.ko FILES+=$(LINUX_DIR)/drivers/media/video/sunxi-vfe/vfe_subdev.ko FILES+=$(LINUX_DIR)/drivers/media/video/sunxi-vfe/device/gc0308.ko FILES+=$(LINUX_DIR)/drivers/media/video/sunxi-vfe/vfe_v4l2.ko AUTOLOAD:=$(call AutoLoad,90,videobuf-core videobuf-dma-contig cci vfe_os vfe_subdev gc0308 vfe_v4l2) endef 修改为： define KernelPackage/sunxi-vfe SUBMENU:=$(VIDEO_MENU) TITLE:=sunxi-vfe support FILES:=$(LINUX_DIR)/drivers/media/video/videobuf-core.ko FILES+=$(LINUX_DIR)/drivers/media/video/videobuf-dma-contig.ko FILES+=$(LINUX_DIR)/drivers/media/video/sunxi-vfe/csi_cci/cci.ko FILES+=$(LINUX_DIR)/drivers/media/video/sunxi-vfe/vfe_os.ko FILES+=$(LINUX_DIR)/drivers/media/video/sunxi-vfe/vfe_subdev.ko FILES+=$(LINUX_DIR)/drivers/media/video/sunxi-vfe/device/hm1375.ko FILES+=$(LINUX_DIR)/drivers/media/video/sunxi-vfe/vfe_v4l2.ko AUTOLOAD:=$(call AutoLoad,90,videobuf-core videobuf-dma-contig cci vfe_os vfe_subdev hm1375 vfe_v4l2) endef 7、 R:\wyb\thl_r16_tinav2.0_hm1375\target\allwinner\astar-parrot\configs\sys_config.fex ;---------------------------------------------------------------------------------- ;dcdc1_vol ---set dcdc1 voltage,mV,1600-3400,100mV/step ;dcdc2_vol ---set dcdc2 voltage,mV,600-1540,20mV/step ;dcdc3_vol ---set dcdc3 voltage,mV,600-1860,20mV/step ;dcdc4_vol ---set dcdc4 voltage,mV,600-1540,20mV/step ;dcdc5_vol ---set dcdc5 voltage,mV,1000-2550,50mV/step ;aldo2_vol ---set aldo2 voltage,mV,700-3300,100mV/step ;aldo3_vol ---set aldo3 voltage,mV,700-3300,100mV/step ;---------------------------------------------------------------------------------- [power_sply] dcdc1_vol = 3000 dcdc2_vol = 1100 dcdc3_vol = 1200 dcdc4_vol = 0 dcdc5_vol = 1500 aldo2_vol = 2500 aldo3_vol = 3000 dldo3_vol = 2800 ;gpio0_vol = 2800 ldoio0_vol = 2800 [twi2] twi_used = 1 twi_scl = port:PE12<3><default><default><default> twi_sda = port:PE13<3><default><default><default> ;-------------------------------------------------------------------------------- ;vip (video input port) configuration ;vip_used: 0:disable 1:enable ;vip_mode: 0:sample one interface to one buffer 1:sample two interface to one buffer ;vip_dev_qty: The quantity of devices linked to capture bus ; ;vip_define_sensor_list: If you want use sensor detect function, please set vip_define_sensor_list = 1, and ; verify that file /system/etc/hawkview/sensor_list_cfg.ini is properly configured! ; ;vip_dev(x)_pos: sensor position, "rear" or "front", if vip_define_sensor_list = 1,vip_dev(x)_pos must be configured! ; ;vip_dev(x)_isp_used 0:not use isp 1:use isp ;vip_dev(x)_fmt: 0:yuv 1:bayer raw rgb ;vip_dev(x)_stby_mode: 0:not shut down power at standby 1:shut down power at standby ;vip_dev(x)_vflip: flip in vertical direction 0:disable 1:enable ;vip_dev(x)_hflip: flip in horizontal direction 0:disable 1:enable ;vip_dev(x)_iovdd: camera module io power handle string, pmu power supply ;vip_dev(x)_iovdd_vol: camera module io power voltage, pmu power supply ;vip_dev(x)_avdd: camera module analog power handle string, pmu power supply ;vip_dev(x)_avdd_vol: camera module analog power voltage, pmu power supply ;vip_dev(x)_dvdd: camera module core power handle string, pmu power supply ;vip_dev(x)_dvdd_vol: camera module core power voltage, pmu power supply ;vip_dev(x)_afvdd: camera module vcm power handle string, pmu power supply ;vip_dev(x)_afvdd_vol: camera module vcm power voltage, pmu power supply ;x indicates the index of the devices which are linked to the same capture bus ;fill voltage in uV, e.g. iovdd = 2.8V, vip_devx_iovdd_vol = 2800000 ;fill handle string as below: ;axp22_eldo3 ;axp22_dldo4 ;axp22_eldo2 ;fill handle string "" when not using any pmu power supply ;-------------------------------------------------------------------------------- [csi0] vip_used = 1 vip_mode = 0 vip_dev_qty = 1 vip_define_sensor_list = 0 vip_csi_pck = port:PE00<2><default><default><default> vip_csi_mck = port:PE01<2><default><default><default> vip_csi_hsync = port:PE02<2><default><default><default> vip_csi_vsync = port:PE03<2><default><default><default> vip_csi_d0 = port:PE04<2><default><default><default> vip_csi_d1 = port:PE05<2><default><default><default> vip_csi_d2 = port:PE06<2><default><default><default> vip_csi_d3 = port:PE07<2><default><default><default> vip_csi_d4 = port:PE08<2><default><default><default> vip_csi_d5 = port:PE09<2><default><default><default> vip_csi_d6 = port:PE10<2><default><default><default> vip_csi_d7 = port:PE11<2><default><default><default> ;vip_csi_sck = port:PE12<2><default><default><default> ;vip_csi_sda = port:PE13<2><default><default><default> vip_dev0_mname = "hm1375" vip_dev0_pos = "rear" vip_dev0_lane = 1 vip_dev0_twi_id = 2 vip_dev0_twi_addr = 0x48 vip_dev0_isp_used = 0 vip_dev0_fmt = 0 （调试的时候推荐选0，给摄像头时钟供电，方便测量电压：） vip_dev0_stby_mode = 0 vip_dev0_vflip = 0 vip_dev0_hflip = 0 vip_dev0_iovdd = "" vip_dev0_iovdd_vol = 2800000 vip_dev0_avdd = "axp22_ldoio0" vip_dev0_avdd_vol = 2800000 vip_dev0_dvdd = "" vip_dev0_dvdd_vol = 1800000 vip_dev0_afvdd = "" vip_dev0_afvdd_vol = 2800000 vip_dev0_power_en = vip_dev0_reset = port:PE14<1><default><default><0> vip_dev0_pwdn = port:PE15<1><default><default><1> vip_dev0_flash_en = vip_dev0_flash_mode = vip_dev0_af_pwdn = 8、可选： rootroot@rootroot-E400:~/wyb/thl_r16_tinav2.0_hm1375$ make menuconfig 内核的修改保存在这里： R:\wyb\thl_r16_tinav2.0_hm1375\target\allwinner\astar-parrot\config-3.4 rootroot@rootroot-E400:~/wyb/thl_r16_tinav2.0_hm1375$ make menuconfig 系统的修改保存在这里： R:\wyb\thl_r16_tinav2.0_hm1375\target\allwinner\astar-parrot\defconfig 9、为了调试方便，可选修改： R:\wyb\thl_r16_tinav2.0_hm1375\target\allwinner\generic\configs\env.cfg bootdelay=3 #default bootcmd, will change at runtime according to key press bootcmd=run setargs_nand boot_normal#default nand boot #kernel command arguments console=ttyS0,115200 nor_root=/dev/mtdblock4 nand_root=/dev/nandd mmc_root=/dev/mmcblk0p7 init=/sbin/init loglevel=8 #set kernel cmdline if boot.img or recovery.img has no cmdline we will use this setargs_nor=setenv bootargs console=${console} root=${nor_root} rootwait init=${init} ion_cma_list="8m,32m,64m,128m,256m"loglevel=${loglevel} partitions=${partitions} setargs_nand=setenv bootargs console=${console} root=${nand_root} rootwait init=${init} ion_cma_list="8m,32m,64m,128m,256m" loglevel=${loglevel} partitions=${partitions} setargs_mmc=setenv bootargs console=${console} root=${mmc_root} rootwait init=${init} ion_cma_list="8m,32m,64m,128m,256m" loglevel=${loglevel} partitions=${partitions} #nand command syntax: sunxi_flash read address partition_name read_bytes #0x40007800 = 0x40008000(kernel entry) - 0x800(boot.img header 2k) boot_normal=fatload sunxi_flash boot 43800000 uImage;bootm 43800000 boot_recovery=fatload sunxi_flash extend 43800000 uImage;bootm 43800000 boot_fastboot=fastboot #recovery key recovery_key_value_max=0x13 recovery_key_value_min=0x10 #fastboot key fastboot_key_value_max=0x8 fastboot_key_value_min=0x2 10、先编译一遍tianv2.0的系统，然后增加sunxi-vfe support支持： rootroot@rootroot-E400:~$ cd wyb/thl_r16_tinav2.0_hm1375/ rootroot@rootroot-E400:~/wyb/thl_r16_tinav2.0_hm1375$ rootroot@rootroot-E400:~/wyb/thl_r16_tinav2.0_hm1375$ 7za x thl_r16_tinav2.0_hm1375等待最终验证_20170824_1141.7z -r -o./ rootroot@rootroot-E400:~/wyb/thl_r16_tinav2.0_hm1375$ source build/envsetup.sh including target/allwinner/octopus-dev/vendorsetup.sh including target/allwinner/astar-parrot/vendorsetup.sh including target/allwinner/astar-evb/vendorsetup.sh including target/allwinner/generic/vendorsetup.sh including target/allwinner/tulip-d1/vendorsetup.sh including target/allwinner/astar-spk/vendorsetup.sh rootroot@rootroot-E400:~/wyb/thl_r16_tinav2.0_hm1375$ lunch You're building on Linux Lunch menu... pick a combo: 1. octopus_dev-tina 2. octopus_dev-dragonboard 3. astar_parrot-tina 4. astar_parrot-dragonboard 5. astar_evb-tina 6. tulip_d1-tina 7. tulip_d1-dragonboard 8. astar_spk-tina 9. astar_spk-dragonboard Which would you like?3 ============================================ PLATFORM_VERSION_CODENAME=Neptune PLATFORM_VERSION=2.0.0 TARGET_PRODUCT=astar_parrot TARGET_BUILD_VARIANT=tina TARGET_BUILD_TYPE=release TARGET_BUILD_APPS= TARGET_ARCH=arm TARGET_ARCH_VARIANT=armv7-a-neon TARGET_CPU_VARIANT=cortex-a7 TARGET_2ND_ARCH= TARGET_2ND_ARCH_VARIANT= TARGET_2ND_CPU_VARIANT= HOST_ARCH=x86_64 HOST_OS=linux HOST_OS_EXTRA=Linux-3.13.0-24-generic-x86_64-with-Ubuntu-14.04-trusty HOST_BUILD_TYPE=release BUILD_ID=57513AA3 OUT_DIR= ============================================ rootroot@rootroot-E400:~/wyb/thl_r16_tinav2.0_hm1375$ make -j8 rootroot@rootroot-E400:~/wyb/thl_r16_tinav2.0_hm1375$ pack -d rootroot@rootroot-E400:~/wyb/thl_r16_tinav2.0_hm1375$ make menuconfig Allwinner ---> < > fpscamera................................. fpscamera just test the camera 修改为： <*> fpscamera................................. fpscamera just test the camera Kernel modules ---> Video Support ---> < > kmod-sunxi-vfe......................................... sunxi-vfe support 修改为： <*> kmod-sunxi-vfe......................................... sunxi-vfe support rootroot@rootroot-E400:~/wyb/thl_r16_tinav2.0_hm1375$ make -j12 rootroot@rootroot-E400:~/wyb/thl_r16_tinav2.0_hm1375$ pack -d 11、加载hm1375的驱动的时候查看I2C是否是通的： R:\wyb\thl_r16_tinav2.0_hm1375\lichee\linux-3.4\drivers\media\video\sunxi-vfe\device\hm1375.c static int sensor_detect(struct v4l2_subdev *sd) { int ret; unsigned char rdval; printk("****wyb %s:%d/%s()! verify HM1375\n", __FILE__, __LINE__, __func__); LOG_ERR_RET(sensor_read(sd, 0x0001, &rdval)) ret = sensor_read(sd, 0x0001,&rdval); printk("****wyb %s:%d/%s()! reg:0x0001=value:0xx right=0x03/0x13\n", __FILE__, __LINE__, __func__, rdval); if (ret < 0) { vfe_dev_err("sensor_read err at sensor_detect!\n"); return ret; } if((rdval != 0x03) && (rdval != 0x13)) { vfe_dev_err("read high val: %d\n", rdval); return -ENODEV; } LOG_ERR_RET(sensor_read(sd, 0x0002, &rdval)) printk("****wyb %s:%d/%s()! reg:0x0002=value:0xx right=0x75\n", __FILE__, __LINE__, __func__, rdval); if(rdval != 0x75) { vfe_dev_err("read low val: %d\n", rdval); return -ENODEV; } printk("HM1375 sensor_detect OK\r\n"); return 0; } （奇怪的时候HM1375的0x0001号寄存器，第一次读是0x03，以后都是0x13，好神奇！） [ 16.030894] ****wyb drivers/media/video/sunxi-vfe/device/hm1375.c:2891/sensor_detect()! verify HM1375 [ 16.042100] ****wyb drivers/media/video/sunxi-vfe/device/hm1375.c:2895/sensor_detect()! reg:0x0001=value:0x03 right=0x03/0x13 [ 16.055259] ****wyb drivers/media/video/sunxi-vfe/device/hm1375.c:2909/sensor_detect()! reg:0x0002=value:0x75 right=0x75 [ 16.067560] HM1375 sensor_detect OK [ 47.398156] ****wyb drivers/media/video/sunxi-vfe/device/hm1375.c:2891/sensor_detect()! verify HM1375 [ 47.409351] ****wyb drivers/media/video/sunxi-vfe/device/hm1375.c:2895/sensor_detect()! reg:0x0001=value:0x13 right=0x03/0x13 [ 47.422492] ****wyb drivers/media/video/sunxi-vfe/device/hm1375.c:2909/sensor_detect()! reg:0x0002=value:0x75 right=0x75 [ 47.434769] HM1375 sensor_detect OK [ 88.217828] ****wyb drivers/media/video/sunxi-vfe/device/hm1375.c:2891/sensor_detect()! verify HM1375 [ 88.228920] ****wyb drivers/media/video/sunxi-vfe/device/hm1375.c:2895/sensor_detect()! reg:0x0001=value:0x13 right=0x03/0x13 [ 88.242056] ****wyb drivers/media/video/sunxi-vfe/device/hm1375.c:2909/sensor_detect()! reg:0x0002=value:0x75 right=0x75 [ 88.254325] HM1375 sensor_detect OK

该函数用于释放 sd_bus_error 结构体占用的内存。sd_bus_error 是在使用 D-Bus 时用于传递错误信息的结构体，由 sd_bus_call()、sd_bus_call_async()、sd_bus_call_method()、sd_bus_call_method_async()、sd_bus_request_name()、sd_bus_release_name() 等函数填充。函数原型如下： ``` void sd_bus_error_free(sd_bus_error *e); ``` 参数 e 是 sd_bus_error 结构体指针。调用该函数后，会释放 e 占用的内存，并将 e 的字段重置为默认值。

阅读全文

void sd_bus_error_free( sd_bus_error *e);

相关推荐

hm1375_tinav2.1验证通过_增加设备ID的读取显示_20170825_1333没有外层目录.7z

多线程调用DBUS服务注意事项

const gchar* method_name = "kylin-screenshot";其中kylin-screenshot不满足D-Bus 中，方法名（method_name）要求，怎么通过一些方式将"kylin-screenshot"替换为满足要求的方法名，还依然使用kylin-screenshot

gst中, srcpad buffer探针附加字符串, 下一个插件srcpad buffer探针获取, c实现, 使用gst_buffer_add_custom_meta

地级市GDP及产业结构数据-最新.zip

2006-2023年上市公司资产误定价Misp数据集（4.9万样本，含原始数据、代码及结果，最新）.zip

Altera和Xilinx FPGA的从串配置模式比较

Spring Boot 教程源码项目：含多种功能示例.zip

R语言高级建模课程全集-最新整理.zip

Python绘制三维心形图案的技术方法

2024年下半年软考中级网络工程GRE与IPSEC的联动配置思路文档

四大政策效应评价方法全集-最新.zip

2024年下半年软考中级网络工程GRE与IPSEC的联动配置

Spring Microservices in Action 第二版代码示例.zip

单基因生物信息学分析视频教程-完整版最新.zip

驾驭未来：Simulink中PMSM永磁同步电机控制深度解析

2000-2020年中国海洋统计年鉴-最新数据发布.zip

图书《Spring Batch 批处理框架》配套源代码项目.zip

最新推荐

多线程调用DBUS服务注意事项

地级市GDP及产业结构数据-最新.zip

2006-2023年上市公司资产误定价Misp数据集（4.9万样本，含原始数据、代码及结果，最新）.zip

Altera和Xilinx FPGA的从串配置模式比较

Spring Boot 教程源码项目：含多种功能示例.zip

高清艺术文字图标资源，PNG和ICO格式免费下载

管理建模和仿真的文件

DMA技术：绕过CPU实现高效数据传输

SGM8701电压比较器如何在低功耗电池供电系统中实现高效率运作？

mui框架HTML5应用界面组件使用示例教程