TIM4->SR=TIM4->SR&0XA1A0
时间: 2023-11-09 18:28:00 浏览: 57
& ~(1<<0);
This code clears the update interrupt flag (UIF) in the status register (SR) of timer 4. The bitmask "(1<<0)" is used to select the first bit, which corresponds to the UIF. By performing a bitwise NOT operation on this bitmask and then ANDing it with the SR, we clear the UIF bit while leaving all other bits unchanged. The result is then written back to the SR register. This code is typically used in the interrupt service routine (ISR) for timer 4, to acknowledge and clear the interrupt flag after the update event has been handled.
相关问题
TIM4->CNT=0;解释一下
这行代码表示对TIM4定时器的CNT寄存器进行赋值操作,将其值设置为0。在嵌入式系统中,定时器通常用于计时、产生中断等功能。CNT寄存器是定时器的计数器,用于记录定时器经过的时间或者计数的次数。通过将CNT寄存器的值设置为0,可以重新开始计时或者清零计数器。这行代码的作用是将TIM4定时器的计数器重置为0。
TIM3->SR&=~(1<<0);
这段代码是针对STM32系列微控制器中的TIM3定时器模块,用来清除TIM3的更新中断标志位。具体来说,TIM3->SR是TIM3定时器的状态寄存器,其中的第0位表示更新中断标志位,它在TIM3计数器溢出时会被置位。 ~(1<<0)表示将二进制数1左移0位,即不移动,并且取反,得到的是二进制数11111110,它的第0位是0,其余位都是1。&=表示按位与赋值运算符,它会将TIM3->SR的值与11111110按位与运算,从而将TIM3的更新中断标志位清零,达到清除中断标志位的目的。