cortex-a7 IRQ介绍
时间: 2023-08-11 22:09:05 浏览: 57
Cortex-A7 IRQ(普通中断请求)是一种中断请求类型,它用于处理低优先级的中断。当Cortex-A7处理器接收到IRQ请求时,它会暂停当前正在执行的指令,并立即切换到IRQ处理程序,这是一段专门处理IRQ请求的代码。与FIQ不同的是,IRQ是一种低优先级的中断,因此处理器可以在处理完当前的IRQ请求后,继续处理先前被中断的指令。Cortex-A7 IRQ可以用于处理那些对于系统来说不是非常关键的功能,例如用户输入、网络数据传输等。通过使用IRQ和FIQ两种不同的中断请求类型,Cortex-A7可以平衡系统的实时性和资源利用率。
相关问题
ast2600 Cortex-A7和Cortex-M3核间通信初始化设置
AST2600芯片同时集成了Cortex-A7和Cortex-M3两个内核,它们之间可以通过IPC(Inter-Processor Communication)机制进行通信。以下是初始化设置的步骤:
1. 配置IPC通道:在A7内核中,使用如下代码创建一个IPC通道:
```c
unsigned int ipc_base = 0x40015000; //IPC基地址
unsigned int ipc_ch = 0; //IPC通道号
unsigned int ipc_size = 0x100; //IPC通道大小
//配置IPC通道
*(volatile unsigned int *)(ipc_base + 0x80 + ipc_ch * 0x20) = ipc_size;
*(volatile unsigned int *)(ipc_base + 0x84 + ipc_ch * 0x20) = 0x0;
*(volatile unsigned int *)(ipc_base + 0x88 + ipc_ch * 0x20) = 0x0;
```
在M3内核中,可以使用如下代码打开IPC通道:
```c
unsigned int ipc_base = 0x48020000; //IPC基地址
unsigned int ipc_ch = 0; //IPC通道号
//打开IPC通道
*(volatile unsigned int *)(ipc_base + 0x10 + ipc_ch * 0x40) = 0x1;
```
2. 配置IPC中断:在A7内核中,使用如下代码配置IPC中断:
```c
unsigned int ipc_irq = 72; //IPC中断号
//使能IPC中断
*(volatile unsigned int *)(0x48200000 + 0x200 + ipc_irq / 32 * 4) |= (1 << (ipc_irq % 32));
```
在M3内核中,使用如下代码配置IPC中断:
```c
unsigned int ipc_irq = 42; //IPC中断号
//使能IPC中断
*(volatile unsigned int *)(0x40001000 + 0x100 + ipc_irq / 32 * 4) |= (1 << (ipc_irq % 32));
```
3. 发送和接收数据:在A7内核中,可以使用如下代码向M3内核发送数据:
```c
unsigned int ipc_base = 0x40015000; //IPC基地址
unsigned int ipc_ch = 0; //IPC通道号
unsigned int data = 0x12345678; //要发送的数据
//发送数据
*(volatile unsigned int *)(ipc_base + 0x8 + ipc_ch * 0x20) = data;
*(volatile unsigned int *)(ipc_base + 0x0 + ipc_ch * 0x20) = 0x1;
```
在M3内核中,可以使用如下代码接收A7内核发送的数据:
```c
unsigned int ipc_base = 0x48020000; //IPC基地址
unsigned int ipc_ch = 0; //IPC通道号
unsigned int data;
//等待数据到来
while (!(*(volatile unsigned int *)(ipc_base + 0x10 + ipc_ch * 0x40) & 0x2));
//读取数据
data = *(volatile unsigned int *)(ipc_base + 0x8 + ipc_ch * 0x40);
```
以上是AST2600 Cortex-A7和Cortex-M3核间通信初始化设置的步骤。需要注意的是,在实际应用中,需要根据具体的硬件平台和操作系统进行相应的修改和适配。
ARM Cortex-A系列处理器中配置中断向量表的方法
在ARM Cortex-A系列处理器中,中断向量表的配置方法与Cortex-M系列处理器略有不同。以下是在ARM Cortex-A系列处理器中配置中断向量表的方法:
1. 定义中断服务函数
首先需要在代码中定义中断服务函数,例如:
```c
void my_irq_handler(void)
{
//中断服务函数代码
}
```
2. 定义中断向量表
在ARM Cortex-A系列处理器中,中断向量表的起始地址和大小是由硬件平台决定的,通常会在启动代码中预留一段特定的内存空间来存储中断向量表。可以使用类似以下的代码来定义中断向量表:
```c
//定义中断向量表
const struct vector_table
{
void (* const irq_handlers[128])(void);
} __attribute__((section(".vector_table"))) VectorTable =
{
//初始化中断向量表
.irq_handlers = {
[0] = my_irq_handler, //中断号为0的中断服务函数
//...
}
};
```
在上述代码中,使用了__attribute__((section(".vector_table")))指令来将中断向量表存储到名为“vector_table”的特定段中,然后将中断服务函数的地址依次写入中断向量表中对应的位置。这里需要注意,中断向量表的大小和中断服务函数的数量取决于硬件平台的具体实现。
以上是在ARM Cortex-A系列处理器中配置中断向量表的方法。由于不同的处理器架构和开发工具可能有不同的实现方法,具体的配置方法需要根据硬件平台的要求进行设置。
相关推荐
![rar](https://img-home.csdnimg.cn/images/20210720083606.png)
![](https://img-home.csdnimg.cn/images/20210720083646.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)