写一个关于单片机stm32f407的串口收发程序
时间: 2023-03-27 16:03:22 浏览: 75
你好,关于单片机stm32f407的串口收发程序,我可以回答你的问题。以下是一个简单的示例代码:
#include "stm32f4xx.h"
void USART2_Init(void)
{
GPIO_InitTypeDef GPIO_InitStruct;
USART_InitTypeDef USART_InitStruct;
NVIC_InitTypeDef NVIC_InitStruct;
// 使能 USART2 和 GPIOA 时钟
RCC_APB1PeriphClockCmd(RCC_APB1Periph_USART2, ENABLE);
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOA, ENABLE);
// 配置 USART2 的引脚
GPIO_InitStruct.GPIO_Pin = GPIO_Pin_2 | GPIO_Pin_3;
GPIO_InitStruct.GPIO_Mode = GPIO_Mode_AF;
GPIO_InitStruct.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStruct.GPIO_OType = GPIO_OType_PP;
GPIO_InitStruct.GPIO_PuPd = GPIO_PuPd_UP;
GPIO_Init(GPIOA, &GPIO_InitStruct);
// 将 PA2 和 PA3 的复用功能配置为 USART2
GPIO_PinAFConfig(GPIOA, GPIO_PinSource2, GPIO_AF_USART2);
GPIO_PinAFConfig(GPIOA, GPIO_PinSource3, GPIO_AF_USART2);
// 配置 USART2
USART_InitStruct.USART_BaudRate = 115200;
USART_InitStruct.USART_WordLength = USART_WordLength_8b;
USART_InitStruct.USART_StopBits = USART_StopBits_1;
USART_InitStruct.USART_Parity = USART_Parity_No;
USART_InitStruct.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
USART_InitStruct.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
USART_Init(USART2, &USART_InitStruct);
// 使能 USART2 的接收中断
USART_ITConfig(USART2, USART_IT_RXNE, ENABLE);
// 配置 NVIC
NVIC_InitStruct.NVIC_IRQChannel = USART2_IRQn;
NVIC_InitStruct.NVIC_IRQChannelPreemptionPriority = ;
NVIC_InitStruct.NVIC_IRQChannelSubPriority = ;
NVIC_InitStruct.NVIC_IRQChannelCmd = ENABLE;
NVIC_Init(&NVIC_InitStruct);
// 使能 USART2
USART_Cmd(USART2, ENABLE);
}
void USART2_IRQHandler(void)
{
if (USART_GetITStatus(USART2, USART_IT_RXNE) != RESET)
{
// 读取接收到的数据
uint16_t data = USART_ReceiveData(USART2);
// 处理接收到的数据
// ...
// 清除中断标志位
USART_ClearITPendingBit(USART2, USART_IT_RXNE);
}
}
void USART2_SendChar(uint8_t ch)
{
// 等待发送缓冲区为空
while (USART_GetFlagStatus(USART2, USART_FLAG_TXE) == RESET);
// 发送数据
USART_SendData(USART2, ch);
// 等待发送完成
while (USART_GetFlagStatus(USART2, USART_FLAG_TC) == RESET);
}
int main(void)
{
USART2_Init();
while (1)
{
// 发送数据
USART2_SendChar('A');
// 延时
for (int i = ; i < 100000; i++);
}
}
希望这个代码对你有帮助。如果你有任何问题,请随时问我。
相关推荐
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)