i2c 写寄存器函数
时间: 2023-08-04 10:05:28 浏览: 100
在 i2c 通信协议中,写寄存器是一个常见的操作。下面是一个示例代码,演示了如何使用 i2c_dev 驱动程序库在 Linux 系统中写入一个 8 位寄存器:
```c
#include <stdio.h>
#include <fcntl.h>
#include <unistd.h>
#include <linux/i2c-dev.h>
#define DEVICE_ADDRESS 0x50
#define REGISTER_ADDRESS 0x01
int main()
{
int file;
char filename[20];
int addr = DEVICE_ADDRESS;
sprintf(filename,"/dev/i2c-1");
if ((file = open(filename,O_RDWR)) < 0) {
perror("Failed to open the i2c bus");
return 1;
}
if (ioctl(file,I2C_SLAVE,addr) < 0) {
perror("Failed to acquire bus access and/or talk to slave");
return 1;
}
// 写入寄存器
char buffer[2] = { REGISTER_ADDRESS, 0x55 };
if (write(file, buffer, 2) != 2) {
perror("Failed to write to the i2c bus");
return 1;
}
// 关闭文件
close(file);
return 0;
}
```
这段代码打开了 i2c-1 总线,并将设备地址设置为 0x50,然后写入了设备的 0x01 号寄存器,写入的数据为 0x55。注意,写入数据的第一个字节应该是寄存器地址,后面才是要写入的数据。你可以将 REGISTER_ADDRESS 和 0x55 修改为你需要写入的寄存器地址和数据。
当然,如果你需要写入多个寄存器,可以在 buffer 数组中添加更多的数据。
相关推荐
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![rar](https://img-home.csdnimg.cn/images/20210720083606.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)