ch445h引脚为SDA为PB11,SCL为PB12,编程语言为C,向ch445h写入数据使得led亮
时间: 2024-02-05 07:10:48 浏览: 16
好的,需要使用I2C协议向CH445H写入数据才能控制LED灯亮灭。以下是一个简单的C语言代码示例,可以实现向CH445H写入数据并控制LED灯亮:
```c
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <fcntl.h>
#include <sys/ioctl.h>
#include <linux/i2c-dev.h>
#define I2C_DEVICE "/dev/i2c-1"
#define CH445H_ADDRESS 0x20
#define LED_ON 0x01
#define LED_OFF 0x00
int main()
{
int file;
char *filename = I2C_DEVICE;
if ((file = open(filename, O_RDWR)) < 0) {
perror("Failed to open the i2c bus");
exit(1);
}
if (ioctl(file, I2C_SLAVE, CH445H_ADDRESS) < 0) {
perror("Failed to acquire bus access and/or talk to slave");
exit(1);
}
// 向LED写入控制命令
char buf[1] = {LED_ON};
if (write(file, buf, 1) != 1) {
perror("Failed to write to the i2c bus");
exit(1);
}
close(file);
return 0;
}
```
上述代码中,我们使用了Linux系统下的I2C驱动程序,通过打开设备文件`/dev/i2c-1`来实现对I2C总线的访问。然后使用`ioctl`函数将I2C地址设置为`0x20`,即CH445H的地址。接着,我们将LED控制命令写入I2C总线,从而控制LED灯的亮灭。在这个例子中,我们将LED灯设置为亮。
需要注意的是,这个代码示例仅供参考,实际应用中需要根据具体的硬件和需求进行修改。