% 网关节点之间的退化 if ismember(i, gateway1) && sum(a1(i, gateway1) == 3) > floor(n_gateway1/2)+1 && n_gateway1 > 0 for j = 1:n_gateway1 if rand() < 0.5 && state1(gateway1(j)) == 0 state1(floor(gateway1(j))) = 2; t_degrade(gateway1(j)) = t + t_degrade; end end end是需要将第一层网关节点与第二层网关节点连接失效其他网关节点有50%概率出现退化。如果两层之间网关节点故障或者失效,两层网络之间连接将会断开。如何修改?
时间: 2024-02-25 07:59:32 浏览: 23
可以在代码中增加一个判断条件,判断第一层网关节点是否已经全部失效,如果全部失效,则不再执行连接失效的代码。修改后的代码如下:
```
if ismember(i, gateway1) && sum(a1(i, gateway1) == 3) > floor(n_gateway1/2)+1 && n_gateway1 > 0 && sum(state1(gateway1)==0) < n_gateway1
for j = 1:n_gateway1
if rand() < 0.5 && state1(gateway1(j)) == 0
state1(floor(gateway1(j))) = 2;
t_degrade(gateway1(j)) = t + t_degrade;
end
end
end
```
这样修改后,当第一层网关节点全部失效时,连接失效的代码就不会被执行,从而避免了两层之间连接的断开。
相关问题
if ismember(i, gateway1) && sum(a1(i, gateway1) == 3) > floor(n_gateway/2)+1 && n_gateway > 0 for j = 1:n_gateway if rand() < 0.5 && state1(gateway1(j)) == 0 state1(gateway1(j)) = 2; t_degrade(gateway1(j)) = t + t_degrade; end end end该代码的详细意思是什么
这段代码是一个 Matlab 代码片段,它的主要作用是在满足一定条件的情况下,随机选择一些网关节点,并将它们的状态改为2,同时更新它们的降级时间。具体来说,它的意思如下:
- 如果变量 i 是 gateway1 中的一个元素,并且 a1(i, gateway1) 中等于3的元素的个数大于 n_gateway/2+1,并且 n_gateway 大于0,则进入if语句块。
- 在if语句块中,遍历所有的网关节点,如果随机生成的一个数小于0.5并且该网关节点的状态为0,则将该网关节点的状态改为2,并将其降级时间设置为当前时间加上一个固定的时间量 t_degrade。
需要注意的是,这段代码片段缺少上下文信息,所以无法确定变量和数组的含义。
位置 2 的索引无效。数组索引必须为正整数或逻辑值。 出错 oooo (line 751) if ismember(i, gateway1) && sum(a1(i, gateway1) == 3) > n_gateway/2+1file = fopen('liangcengjiedian.txt', 'r'); % 去掉空格 if file ~= -1 % 确认文件已经被正确打开 data = textscan(file, '(%f,%f,%f) to (%f,%f,%f)\n'); n_gateway = length(data{1}); gateway1 = []; gateway2 = []; for i = 1:size(data{1}, 1) x1 = data{1}(i); y1 = data{2}(i); z1 = data{3}(i); x2 = data{4}(i); y2 = data{5}(i); z2 = data{6}(i); gateway1 = [gateway1; x1, y1, z1]; gateway2 = [gateway2; x2, y2, z2]; end fclose(file); % 记得关闭文件 else disp('Error: file not found or could not be opened.'); end % 使用randperm函数随机选择n_gateway个网关 n_gateway = min(n_gateway, size(gateway1, 1)); idx = randperm(size(gateway1, 1), n_gateway); gateway1 = gateway1(idx, :); gateway2 = gateway2(idx, :); state1 = zeros(n1, 1); % 第一层节点状态 state2 = zeros(n2, 1); % 第二层节点状态 修改为正确代码
这个错误信息说明了在代码中使用了一个无效的索引位置2。具体来说,可能是在a1(i, gateway1)这一行代码中,i取值为2,但是gateway1数组的长度小于2,导致出现了这个错误。你需要检查一下gateway1数组的长度是否正确,或者在使用这个数组之前先进行长度判断和处理。以下是修改后的代码:
```
file = fopen('liangcengjiedian.txt', 'r'); % 去掉空格
if file ~= -1 % 确认文件已经被正确打开
data = textscan(file, '(%f,%f,%f) to (%f,%f,%f)\n');
n_gateway = length(data{1});
gateway1 = [];
gateway2 = [];
for i = 1:size(data{1}, 1)
x1 = data{1}(i);
y1 = data{2}(i);
z1 = data{3}(i);
x2 = data{4}(i);
y2 = data{5}(i);
z2 = data{6}(i);
gateway1 = [gateway1; x1, y1, z1];
gateway2 = [gateway2; x2, y2, z2];
end
fclose(file); % 记得关闭文件
else
disp('Error: file not found or could not be opened.');
end
% 使用randperm函数随机选择n_gateway个网关
n_gateway = min(n_gateway, size(gateway1, 1));
if n_gateway > 0
idx = randperm(size(gateway1, 1), n_gateway);
gateway1 = gateway1(idx, :);
gateway2 = gateway2(idx, :);
end
state1 = zeros(n1, 1); % 第一层节点状态
state2 = zeros(n2, 1); % 第二层节点状态
```
这里加了一个判断,如果n_gateway为0,则不进行随机选择网关的操作。
相关推荐
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)