1. 根据ReadChar:这个函数需要从 UART 中读取接收到的字符,并检查它是否为大写字母。我们需要通过在串行终端中输入不同的字符并检查 X 的值,确保它与实际值相同。 要求,完善void ReadChar(char c){ if (c >= 'A' && c <= 'Z'){ X = c; } }
时间: 2024-03-10 14:45:33 浏览: 16
完善后的代码如下:
```c
void ReadChar(char c){
if (c >= 'A' && c <= 'Z'){
X = c;
}
}
```
这个函数接受一个字符作为参数 `c`,并检查它是否为大写字母。如果是大写字母,则将它赋值给变量 `X`。
为了调试这个函数,我们可以在程序中添加一些代码,例如:
```c
while (1) {
if (flag) {
// there is a new character
ReadChar(c);
printf("Received character: %c\n", c);
printf("X = %c\n", X);
flag = 0; // clear the flag
}
// do something else
}
```
这段代码会不断检测是否有新的字符接收到,并调用 ReadChar 函数处理这个字符。然后,它会在串行终端中打印出接收到的字符和变量 `X` 的值,以便我们检查函数是否正确地识别大写字母并将它们赋值给 `X` 变量。
相关问题
分析需求o BlinkMorseCode: function to take a capital letter as input and control the P_LD1 to blink the corresponding Morse-code. Debug your code for the letters ‘H’, ‘O’, and ‘X’. o ReadChar: A function that reads the received character from UART and checks if it is a capital letter. Debug your code by entering different characters in the serial terminal and checking the value of X and making sure it is the same. o AddtoCharBuff: A function to add X to CharBuff and updates the tail. Debug by checking the head and tail and values in CharBuff after adding X when CharBuff is full, almost full, half full, empty. o ReadfromCharBuff: A function to read and return the oldest value in CharBuff. Debug by checking that the correct character is returned and tail and head have the correct values after reading from a full, almost full, half full, or empty CharBuff.
1. BlinkMorseCode:这个函数需要接受一个大写字母作为输入,并控制 P_LD1 以闪烁对应的莫尔斯码。我们需要对字母 ‘H’,‘O’和‘X’ 进行调试,确保它们能正确地显示对应的莫尔斯码。
2. ReadChar:这个函数需要从 UART 中读取接收到的字符,并检查它是否为大写字母。我们需要通过在串行终端中输入不同的字符并检查 X 的值,确保它与实际值相同。
3. AddtoCharBuff:这个函数需要向 CharBuff 中添加 X,并更新尾部。我们需要在 CharBuff 满、几乎满、一半满和空的情况下检查头、尾和 CharBuff 中的值,以调试这个函数。
4. ReadfromCharBuff:这个函数需要读取并返回 CharBuff 中最旧的值。我们需要在 CharBuff 满、几乎满、一半满和空的情况下检查返回的字符是否正确,并检查读取后头和尾的值是否正确。
已知uart_set_rx_callback(ReadChar)我想写一个ReadChar函数,使得从uart端口获得的字符可以被放进一个数组charbuff中
好的,我可以帮你写一个示例的ReadChar函数,如下所示:
```c
#define BUFF_SIZE 100 // 定义缓冲区大小
char charbuff[BUFF_SIZE]; // 定义字符缓冲区数组
int char_count = 0; // 记录缓冲区中字符数
void ReadChar(uint8_t c) {
if(char_count < BUFF_SIZE - 1) { // 如果缓冲区未满
charbuff[char_count++] = c; // 将字符加入缓冲区并更新计数器
}
}
```
这个函数会在每次从uart端口接收到一个字符时被调用,并将该字符加入到缓冲区中。需要注意的是,这个函数中使用了缓冲区的概念,缓冲区是用来存储数据的内存区域,当数据到达时,将其存储在缓冲区中,并在需要时从缓冲区中读取数据。在这个示例中,我们使用了一个字符数组来实现缓冲区,并使用一个计数器来记录缓冲区中已经存储的字符数,当计数器达到缓冲区大小时,将不再接收新的字符。