qt ioctl
时间: 2023-07-05 18:09:23 浏览: 96
在 Qt 中使用 ioctl 函数可以通过调用 Linux 内核提供的设备驱动程序中的 ioctl 接口来对设备进行操作。ioctl 函数的原型如下:
```c++
#include <sys/ioctl.h>
int ioctl(int fd, unsigned long request, ...);
```
其中,fd 是设备文件描述符,request 是请求的命令码,后面的可变参数是传递给命令的参数。
例如,如果我们想要在 Qt 中通过 ioctl 函数设置串口的波特率,可以按照以下步骤进行:
1. 打开串口设备,获取设备文件描述符:
```c++
int fd = open("/dev/ttyS0", O_RDWR | O_NOCTTY);
if (fd == -1) {
qDebug() << "Open serial port failed!";
return -1;
}
```
2. 定义一个结构体来存储串口参数:
```c++
struct termios options;
```
3. 获取当前的串口参数:
```c++
tcgetattr(fd, &options);
```
4. 设置波特率:
```c++
speed_t speed = B115200;
cfsetispeed(&options, speed);
cfsetospeed(&options, speed);
```
5. 使用 ioctl 函数将新的串口参数设置到串口设备中:
```c++
int ret = ioctl(fd, TCSETS, &options);
if (ret == -1) {
qDebug() << "Set serial port options failed!";
return -1;
}
```
6. 关闭设备文件描述符:
```c++
close(fd);
```
这样就完成了在 Qt 中通过 ioctl 函数设置串口波特率的操作。