将adc转换的数据通过GATT发送给手机端
时间: 2024-05-04 13:22:29 浏览: 120
首先,您需要在您的蓝牙设备上实现GATT服务器来发送数据。以下是一个基本的示例:
```C++
#include <BLEDevice.h>
#include <BLEUtils.h>
#include <BLEServer.h>
#define SERVICE_UUID "your_service_uuid_here"
#define CHARACTERISTIC_UUID "your_characteristic_uuid_here"
BLEServer* pServer = NULL;
BLECharacteristic* pCharacteristic = NULL;
bool deviceConnected = false;
class MyServerCallbacks: public BLEServerCallbacks {
void onConnect(BLEServer* pServer) {
deviceConnected = true;
};
void onDisconnect(BLEServer* pServer) {
deviceConnected = false;
}
};
void setup() {
BLEDevice::init("YourDeviceName");
pServer = BLEDevice::createServer();
pServer->setCallbacks(new MyServerCallbacks());
BLEService *pService = pServer->createService(SERVICE_UUID);
pCharacteristic = pService->createCharacteristic(
CHARACTERISTIC_UUID,
BLECharacteristic::PROPERTY_READ |
BLECharacteristic::PROPERTY_NOTIFY
);
pCharacteristic->addDescriptor(new BLE2902());
pService->start();
BLEAdvertising *pAdvertising = BLEDevice::getAdvertising();
pAdvertising->addServiceUUID(SERVICE_UUID);
pAdvertising->setScanResponse(true);
pAdvertising->setMinPreferred(0x06); // set value to 0x00 to not advertise this parameter
pAdvertising->setMinPreferred(0x12);
BLEDevice::startAdvertising();
}
void loop() {
if (deviceConnected) {
// generate ADC data and send it as notification
uint16_t adcData = analogRead(A0);
pCharacteristic->setValue(&adcData, sizeof(adcData));
pCharacteristic->notify();
}
delay(1000);
}
```
在这个示例中,我们创建了一个GATT服务器,并在其中添加了一个特征,以便读取和通知。我们还添加了一个设备连接回调函数,以便在设备连接和断开连接时更新设备连接状态。在loop函数中,我们生成ADC数据并将其设置为特征值,然后通过调用notify函数将其发送给已连接的设备。
注意,您需要将`your_service_uuid_here`和`your_characteristic_uuid_here`替换为您自己的UUID。
阅读全文