使用CAPL编写控制程控电源的代码,实现连接USB串口连接,输出电压电流,读出电压电流值。并不需要另外配置变量。
时间: 2024-05-08 16:20:37 浏览: 32
下面是一个简单的示例代码,使用CAPL语言控制程控电源,连接USB串口,输出电压电流,读取电压电流值:
```
// 声明变量
int hPort;
long result;
byte buffer[256];
// 打开串口
hPort = TestOpenSerial("USB", 9600);
// 设置输出电压为3V,电流为1A
result = TestSendCommand(hPort, "VOLT 3;CURR 1");
// 输出电压电流
result = TestSendCommand(hPort, "OUTP:ON");
result = TestSendCommand(hPort, "MEAS:VOLT?");
result = TestReadData(hPort, buffer, sizeof(buffer));
write("Output voltage: %s\n", buffer);
result = TestSendCommand(hPort, "MEAS:CURR?");
result = TestReadData(hPort, buffer, sizeof(buffer));
write("Output current: %s\n", buffer);
// 关闭串口
TestCloseSerial(hPort);
```
以上代码中,我们首先声明了需要使用的变量:hPort表示串口句柄,result表示函数调用结果,buffer用于存储读取到的数据。
然后,我们使用TestOpenSerial函数打开串口连接,连接方式为USB,波特率为9600。接着,我们使用TestSendCommand函数向电源发送设置电压电流的命令,将电压设置为3V,电流设置为1A。
接下来,我们使用TestSendCommand函数向电源发送开启输出的命令,然后使用TestSendCommand函数分别读取电压和电流值,并将读取到的值存储在buffer中,最后使用write函数输出电压和电流值。
最后,我们使用TestCloseSerial函数关闭串口连接。
相关推荐
![pdf](https://img-home.csdnimg.cn/images/20210720083512.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)