开发板为s3c2410系列,请用c语言写一个利用串口从上位机接受字符串并原文返回给上位机的程序
时间: 2024-03-16 08:42:12 浏览: 14
好的,以下是一个简单的利用串口从上位机接收字符串并原文返回的程序,使用的是C语言,适用于S3C2410系列开发板:
```c
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <fcntl.h>
#include <termios.h>
#include <unistd.h>
#define SERIAL_PORT "/dev/ttySAC0" // 串口设备路径
#define BAUD_RATE B9600 // 波特率
int main()
{
int fd;
struct termios options;
char buf[255];
// 打开串口设备
fd = open(SERIAL_PORT, O_RDWR | O_NOCTTY | O_NDELAY);
if (fd == -1)
{
perror("open");
exit(1);
}
// 设置串口属性
tcgetattr(fd, &options);
cfsetispeed(&options, BAUD_RATE);
cfsetospeed(&options, BAUD_RATE);
options.c_cflag |= (CLOCAL | CREAD);
options.c_cflag &= ~PARENB;
options.c_cflag &= ~CSTOPB;
options.c_cflag &= ~CSIZE;
options.c_cflag |= CS8;
options.c_cc[VMIN] = 1;
options.c_cc[VTIME] = 0;
tcsetattr(fd, TCSANOW, &options);
// 循环读取串口输入并原文返回
while (1)
{
int n = read(fd, buf, 255);
if (n > 0)
{
write(fd, buf, n);
}
}
// 关闭串口设备
close(fd);
return 0;
}
```
这个程序打开串口设备后,使用`read()`函数读取串口输入,然后使用`write()`函数将读到的字符串原文返回给上位机。程序会一直循环执行,直到遇到错误或被中断。请注意,这个程序没有进行错误处理和输入缓冲,需要根据实际情况进行修改和优化。