spi_register_driver
时间: 2023-04-29 13:00:54 浏览: 66
spi_register_driver是一个Linux内核函数,用于向系统注册SPI总线驱动程序。它的作用是将SPI总线驱动程序与SPI总线设备进行匹配,使得系统能够正确地识别和使用SPI总线设备。在使用SPI总线设备时,需要先调用spi_register_driver函数进行注册,然后才能进行SPI总线设备的操作。
相关问题
spi_setup是什么函数
`spi_setup`是Linux内核中一个函数,用于初始化SPI驱动程序中的SPI设备信息,包括SPI总线的传输模式、传输速率、传输位数等参数。该函数通常在设备驱动程序的`probe`函数中被调用,以便对SPI设备进行初始化。
该函数的原型如下所示:
```
int spi_setup(struct spi_device *spi);
```
其中,`spi_device`结构体定义了SPI设备的信息,包括设备的名称、设备的片选信号、SPI总线的传输模式、传输速率、传输位数等参数。在调用`spi_setup`函数时,需要传入一个指向`spi_device`结构体的指针,以便对该结构体中的参数进行初始化。
`spi_setup`函数的主要作用是根据`spi_device`结构体中的参数,设置SPI总线的传输模式、传输速率、传输位数等参数,以便确保SPI设备可以正常进行数据传输。该函数还可以在需要时调用其他SPI驱动程序提供的API函数来完成SPI设备的初始化工作。
需要注意的是,在使用`spi_setup`函数之前,需要先通过SPI总线的API函数注册SPI设备,并为该设备分配一个唯一的设备号(device number)。只有在设备注册成功后,才能使用`spi_setup`函数对设备进行初始化。
在设备的`probe`函数中,通常会依次调用`spi_register_driver`函数注册SPI驱动程序、`spi_alloc_device`函数为SPI设备分配内存、`spi_setup`函数对SPI设备进行初始化等操作,以便确保SPI设备可以正常工作。
s8 BME280_SPI_bus_read(u8 dev_addr, u8 reg_addr, u8 *reg_data, u8 cnt) { s32 iError=BME280_INIT_VALUE; u8 array[SPI_BUFFER_LEN]={0,}; u8 stringpos; /* For the SPI mode only 7 bits of register addresses are used. The MSB of register address is declared the bit what functionality it is read/write (read as 1/write as BME280_INIT_VALUE)*/ array[BME280_INIT_VALUE] = reg_addr|SPI_READ;/*read routine is initiated register address is mask with 0x80*/ /* * Please take the below function as your reference for * read the data using SPI communication * " IERROR = SPI_READ_WRITE_STRING(ARRAY, ARRAY, CNT+1)" * add your SPI read function here * iError is an return value of SPI read function * Please select your valid return value * In the driver SUCCESS defined as 0 * and FAILURE defined as -1 * Note : * This is a full duplex operation, * The first read data is discarded, for that extra write operation * have to be initiated. For that cnt+1 operation done in the SPI read * and write string function * For more information please refer data sheet SPI communication: */ for (stringpos = BME280_INIT_VALUE; stringpos < cnt; stringpos++) { *(reg_data + stringpos) = array[stringpos+BME280_DATA_INDEX]; } return (s8)iError; }
这段代码是用于通过SPI总线读取BME280传感器数据的SPI总线读取函数。
具体解析如下:
```c
s8 BME280_SPI_bus_read(u8 dev_addr, u8 reg_addr, u8 *reg_data, u8 cnt)
{
s32 iError = BME280_INIT_VALUE; // 用于存储错误码的变量
u8 array[SPI_BUFFER_LEN] = {0}; // 用于存储读取数据的数组
u8 stringpos;
// 在数组中存储读取操作的命令字节
array[BME280_INIT_VALUE] = reg_addr | SPI_READ;
/*
* 请在这里添加你的SPI读取函数
* iError 是SPI读取函数的返回值,根据你的实际情况选择合适的返回值
* 在该驱动程序中,成功定义为0,失败定义为-1
* 注意:
* 这是一个全双工操作,
* 第一个读取的数据被丢弃,所以需要额外的写操作
* 在SPI读写字符串函数中进行了cnt+1次操作
* 更多信息请参考BME280数据手册中的SPI通信部分:
*/
// 将读取到的数据存储到reg_data数组中
for (stringpos = BME280_INIT_VALUE; stringpos < cnt; stringpos++) {
*(reg_data + stringpos) = array[stringpos + BME280_DATA_INDEX];
}
return (s8)iError;
}
```
这段代码使用了一些宏定义和变量类型,其中s8是一个8位有符号整数类型,u8是一个8位无符号整数类型,s32是一个32位有符号整数类型。
这个函数的目的是通过SPI总线读取BME280传感器的数据。它接收设备地址、寄存器地址、用于存储读取数据的数组以及要读取数据的数量作为参数。
在这段代码中,首先在数组中存储读取操作的命令字节。然后,通过调用SPI读取函数(你需要根据你的实际情况添加实现),将读取到的数据存储到reg_data数组中。
请注意,这段代码只是一个示例,具体的实现可能会因你使用的SPI库和开发环境而有所不同。确保你正确配置了SPI总线,并根据你的具体需求和通信协议,编写和调用适合你的SPI读取函数。
相关推荐
![rar](https://img-home.csdnimg.cn/images/20210720083606.png)
![pdf](https://img-home.csdnimg.cn/images/20210720083512.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)