i2c读写16位寄存器代码
时间: 2023-07-10 15:09:57 浏览: 145
在I2C通信中,有些设备的寄存器地址需要16位(例如16位的地址寄存器),此时需要进行16位数据的读写操作。以下是在Linux中使用i2c-dev驱动程序进行16位寄存器读写的示例代码:
```c
#include <stdio.h>
#include <stdlib.h>
#include <fcntl.h>
#include <unistd.h>
#include <sys/ioctl.h>
#include <linux/i2c-dev.h>
#define I2C_ADDR 0x68
#define REG_ADDR 0x00
int main()
{
int fd;
char buf[3];
// 打开I2C设备文件
fd = open("/dev/i2c-0", O_RDWR);
if (fd < 0) {
perror("open");
exit(1);
}
// 设置从设备地址
if (ioctl(fd, I2C_SLAVE, I2C_ADDR) < 0) {
perror("ioctl");
exit(1);
}
// 读取寄存器值
buf[0] = REG_ADDR >> 8; // 高位地址
buf[1] = REG_ADDR & 0xff; // 低位地址
if (write(fd, buf, 2) != 2) {
perror("write");
exit(1);
}
if (read(fd, buf, 2) != 2) {
perror("read");
exit(1);
}
// 计算寄存器值
int reg_value = (buf[0] << 8) | buf[1];
// 输出寄存器值
printf("Register value: %d\n", reg_value);
// 关闭I2C设备文件
close(fd);
return 0;
}
```
以上代码中,buf数组的大小为3,其中buf[0]表示高位地址,buf[1]表示低位地址,buf[2]表示读取的数据。通过将寄存器地址分为高位和低位两部分,可以实现16位寄存器的读写。在读取数据后,需要将buf数组中的两个字节合并为一个16位整数,即可得到寄存器的值。