8-Probe测试NSA组网指导书：连接配置及路由配置方法详解

The "8-Probe Testing NSA Network Deployment Guide" provides detailed instructions on how to configure and connect 4G and 5G TUE modules for testing. Before beginning the testing process, it is crucial to ensure that the PC and TUE are on the same network segment. For the 4G TUE, the IP address can be obtained through a specific method, and then the route is added through the following steps: opening the network and sharing center, changing adapter settings, unchecking IPv6, selecting IPv4, and setting the IP address to be in the same segment as the UE's IP address to avoid conflicts. The subnet mask should be configured as 255.255.255.0. If multiple IP segments need to be set, the advanced options can be used to add them. The 5G TUE follows a similar process for connecting and configuring the route to ensure that the PC and 5G TUE are on the same network segment. Through these detailed instructions and configurations, the guide aims to facilitate the smooth connection and testing process for 4G and 5G TUE modules in NSA network deployment. The guide emphasizes the importance of proper configuration to avoid IP conflicts and ensure seamless connectivity for testing. Following the outlined steps is essential for successful testing and deployment of NSA network configurations. Overall, the "8-Probe Testing NSA Network Deployment Guide" is a comprehensive resource for network engineers and technicians involved in the setup and testing of NSA network configurations. The guide's clear and specific instructions provide a step-by-step approach to configuring and connecting 4G and 5G TUE modules for testing, ultimately contributing to the successful deployment of NSA network setups.