STM32的发送数据代码,通过串口发送数据到HC-05
时间: 2024-04-29 10:25:27 浏览: 16
以下是使用STM32向HC-05模块发送数据的代码:
```c
#include "stm32f4xx.h"
#include "stm32f4xx_usart.h"
#include "stm32f4xx_gpio.h"
#include "stm32f4xx_rcc.h"
USART_InitTypeDef USART_InitStruct;
void USART_Config(void)
{
GPIO_InitTypeDef GPIO_InitStructure;
// 打开串口和GPIO的时钟
RCC_APB1PeriphClockCmd(RCC_APB1Periph_USART2, ENABLE);
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOA, ENABLE);
// 配置USART2的GPIO引脚
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2 | GPIO_Pin_3;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP;
GPIO_Init(GPIOA, &GPIO_InitStructure);
// 配置USART2的波特率、数据位、停止位和校验位
USART_InitStruct.USART_BaudRate = 9600;
USART_InitStruct.USART_WordLength = USART_WordLength_8b;
USART_InitStruct.USART_StopBits = USART_StopBits_1;
USART_InitStruct.USART_Parity = USART_Parity_No;
USART_InitStruct.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
USART_InitStruct.USART_Mode = USART_Mode_Tx;
USART_Init(USART2, &USART_InitStruct);
// 启用USART2
USART_Cmd(USART2, ENABLE);
}
void USART_SendString(char* s)
{
while (*s)
{
// 等待USART2准备好发送数据
while (USART_GetFlagStatus(USART2, USART_FLAG_TXE) == RESET);
// 发送数据
USART_SendData(USART2, *s++);
}
}
int main(void)
{
USART_Config();
while (1)
{
// 发送数据到HC-05模块
USART_SendString("Hello HC-05!\r\n");
// 延迟1s
for (int i = 0; i < 1000000; i++);
}
}
```
在上面的代码中,`USART_Config()`函数用于初始化USART2和相关的GPIO引脚,`USART_SendString()`函数用于发送字符串数据到USART2,`main()`函数中通过不断发送数据到HC-05模块来测试发送功能。在使用前,需要根据具体的硬件连接情况和需求修改代码中的波特率、GPIO引脚等参数。
相关推荐
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)