your_MQTT_broker_server_address怎么写
时间: 2023-08-03 20:05:32 浏览: 63
MQTT broker server address 的写法可能会因不同的MQTT服务器而异。一般情况下,MQTT broker server address 由两部分组成:主机地址和端口号。例如,如果你使用Eclipse Mosquitto作为MQTT broker,其默认的主机地址为"localhost",默认的端口号为"1883",因此your_MQTT_broker_server_address应该为"localhost:1883"。如果你使用其它的MQTT broker,可以参考其官方文档来确定正确的主机地址和端口号。
相关问题
esp32 arduino mqtt的连接代码中mqttserver该怎么写,例子
如果你想在ESP32 Arduino中连接到MQTT服务器,以下是一个示例代码,你可以将其中的`mqttServer`变量替换为你的MQTT服务器地址:
```C++
#include <WiFi.h>
#include <PubSubClient.h>
// Replace the variables below with your network credentials and MQTT broker details
const char* ssid = "your_SSID";
const char* password = "your_PASSWORD";
const char* mqttServer = "your_MQTT_broker_server_address"; // 替换为你的MQTT服务器地址
const int mqttPort = 1883;
const char* mqttUser = "your_MQTT_username";
const char* mqttPassword = "your_MQTT_password";
WiFiClient espClient;
PubSubClient client(espClient);
void setup() {
Serial.begin(115200);
WiFi.begin(ssid, password);
while (WiFi.status() != WL_CONNECTED) {
delay(1000);
Serial.println("Connecting to WiFi...");
}
Serial.println("Connected to WiFi");
client.setServer(mqttServer, mqttPort);
client.setCallback(callback);
while (!client.connected()) {
Serial.println("Connecting to MQTT...");
if (client.connect("ESP32Client", mqttUser, mqttPassword )) {
Serial.println("Connected to MQTT");
client.subscribe("testTopic");
} else {
Serial.print("Failed with state ");
Serial.print(client.state());
delay(2000);
}
}
}
void loop() {
if (!client.connected()) {
reconnect();
}
client.loop();
}
void callback(char* topic, byte* message, unsigned int length) {
Serial.print("Message received on topic: ");
Serial.print(topic);
Serial.print(". Message: ");
String messageTemp;
for (int i = 0; i < length; i++) {
messageTemp += (char)message[i];
}
Serial.println(messageTemp);
}
void reconnect() {
while (!client.connected()) {
Serial.println("Connecting to MQTT...");
if (client.connect("ESP32Client", mqttUser, mqttPassword )) {
Serial.println("Connected to MQTT");
client.subscribe("testTopic");
} else {
Serial.print("Failed with state ");
Serial.print(client.state());
delay(2000);
}
}
}
```
在这个代码中,我们使用`mqttServer`变量来保存MQTT服务器地址,你只需要将它替换为你自己的MQTT服务器地址即可。
帮我用PubSubClient写个完整的MQTT例程
好的,我可以为您提供一个简单的MQTT例程,使用PubSubClient库来连接到MQTT代理服务器并发布和订阅主题。以下是完整的代码:
```
#include <WiFi.h>
#include <PubSubClient.h>
// WiFi连接信息
const char* ssid = "your_SSID";
const char* password = "your_PASSWORD";
// MQTT代理服务器信息
const char* mqtt_server = "your_MQTT_server_address";
const int mqtt_port = 1883;
const char* mqtt_username = "your_MQTT_username";
const char* mqtt_password = "your_MQTT_password";
WiFiClient espClient;
PubSubClient client(espClient);
void setup_wifi() {
delay(10);
Serial.println();
Serial.print("Connecting to ");
Serial.println(ssid);
WiFi.begin(ssid, password);
while (WiFi.status() != WL_CONNECTED) {
delay(500);
Serial.print(".");
}
Serial.println("");
Serial.println("WiFi connected");
Serial.println("IP address: ");
Serial.println(WiFi.localIP());
}
void callback(char* topic, byte* payload, unsigned int length) {
Serial.print("Message arrived [");
Serial.print(topic);
Serial.print("] ");
for (int i = 0; i < length; i++) {
Serial.print((char)payload[i]);
}
Serial.println();
}
void reconnect() {
while (!client.connected()) {
Serial.print("Connecting to MQTT Broker...");
if (client.connect("ESP32Client", mqtt_username, mqtt_password )) {
Serial.println("connected");
client.subscribe("testTopic");
} else {
Serial.print("failed, rc=");
Serial.print(client.state());
Serial.println(" try again in 5 seconds");
delay(5000);
}
}
}
void setup() {
Serial.begin(9600);
setup_wifi();
client.setServer(mqtt_server, mqtt_port);
client.setCallback(callback);
}
void loop() {
if (!client.connected()) {
reconnect();
}
client.loop();
char msg[50];
sprintf(msg, "Hello from ESP32");
client.publish("testTopic", msg);
delay(5000);
}
```
在使用此代码之前,请将代码中的以下值替换为您的WiFi和MQTT服务器信息:
- your_SSID:您的WiFi网络名称
- your_PASSWORD:您的WiFi网络密码
- your_MQTT_server_address:您的MQTT代理服务器地址
- mqtt_username:MQTT代理服务器的用户名
- mqtt_password:MQTT代理服务器的密码
此代码连接到您的WiFi网络和MQTT代理服务器,并发布名为"testTopic"的消息。当收到该主题的消息时,它将调用回调函数并将消息打印到串行监视器中。
请注意,您需要安装PubSubClient库才能编译此代码。
相关推荐
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)