外部触发中断的代码怎么写
时间: 2023-12-01 07:55:23 浏览: 30
外部触发中断的代码通常需要使用特定的硬件来实现,例如使用外部中断引脚或者定时器中断等。以下是使用Arduino Uno的外部中断引脚2(INT0)实现的示例代码:
```
const int interruptPin = 2; // 外部中断引脚号
volatile bool flag = false; // 中断标志位
void setup() {
pinMode(interruptPin, INPUT_PULLUP); // 将引脚设置为输入模式并开启上拉电阻
attachInterrupt(digitalPinToInterrupt(interruptPin), interruptHandler, FALLING); // 绑定中断处理函数到引脚下降沿触发
}
void loop() {
// 在循环中检测中断标志位是否被置位
if (flag) {
// 中断被触发,执行相应操作
Serial.println("Interrupt triggered!");
flag = false; // 重置中断标志位
}
}
void interruptHandler() {
// 中断处理函数,将中断标志位置位
flag = true;
}
```
在上述代码中,我们将引脚2设置为输入模式并开启上拉电阻,同时通过`attachInterrupt()`函数将中断处理函数`interruptHandler()`绑定到引脚下降沿触发。在循环中,我们通过检测中断标志位`flag`来判断中断是否被触发,如果被触发,则执行相应操作并将标志位重置。在中断处理函数中,我们简单地将中断标志位置位即可。