stm32cubeIDE串口通信:在stm32cubemx中配置串口参数,使用USART1串口,采用中断接收数据,使用DMA方式发送数据的具体配置代码
时间: 2024-05-24 08:10:32 浏览: 29
1. 在stm32cubemx中配置串口参数
首先,打开stm32cubemx软件,新建一个工程,选择需要使用的芯片型号,并进行初始化配置。
在Pinout & Configuration选项卡中,选择USART1,然后在右侧的Configuration栏中配置串口参数,如下图所示:
![image](https://user-images.githubusercontent.com/57706581/129364710-0b0ec9cd-7e6c-4e05-8d0c-6b7ee6e5c8b7.png)
其中,Baud Rate设置为115200,Data Bits为8,Stop Bits为1,Parity为None,Flow Control为None。
在Project Manager选项卡中,点击GENERATE CODE按钮生成代码。
2. 使用USART1串口,采用中断接收数据
在生成的代码中,找到main.c文件,在main函数中添加以下代码:
```
/* USER CODE BEGIN 2 */
HAL_UART_Receive_IT(&huart1, RxData, 1);
/* USER CODE END 2 */
```
这段代码的作用是启动USART1串口的中断接收功能,当接收到数据时,会触发中断,并执行中断处理函数。
在stm32cubeIDE中,中断处理函数的名称为USART1_IRQHandler,在stm32cubemx生成的代码中已经定义了该函数,我们只需要在该函数中添加处理接收数据的代码即可。
在USART1_IRQHandler函数中添加以下代码:
```
void USART1_IRQHandler(void)
{
/* USER CODE BEGIN USART1_IRQn 0 */
/* USER CODE END USART1_IRQn 0 */
HAL_UART_IRQHandler(&huart1);
/* USER CODE BEGIN USART1_IRQn 1 */
if (__HAL_UART_GET_IT(&huart1, UART_IT_RXNE) != RESET)
{
uint8_t data;
HAL_UART_Receive(&huart1, &data, 1, 0xFFFF);
// 处理接收到的数据
}
/* USER CODE END USART1_IRQn 1 */
}
```
其中,__HAL_UART_GET_IT函数用于判断是否接收到了数据,如果接收到了数据,则调用HAL_UART_Receive函数接收数据,并进行处理。
3. 使用DMA方式发送数据
在stm32cubemx生成的代码中,已经默认启用了DMA方式发送数据,我们只需要在main函数中添加以下代码即可:
```
/* USER CODE BEGIN 4 */
uint8_t TxData[] = "Hello World!\r\n";
HAL_UART_Transmit_DMA(&huart1, TxData, sizeof(TxData));
/* USER CODE END 4 */
```
这段代码的作用是启动USART1串口的DMA发送功能,将TxData数组中的数据发送出去。
至此,我们已经完成了使用USART1串口,采用中断接收数据,使用DMA方式发送数据的配置代码。完整代码如下:
```
#include "main.h"
#include "stm32f1xx_hal.h"
#include "usart.h"
#include "gpio.h"
uint8_t RxData[1];
void SystemClock_Config(void);
int main(void)
{
HAL_Init();
SystemClock_Config();
MX_GPIO_Init();
MX_USART1_UART_Init();
/* USER CODE BEGIN 2 */
HAL_UART_Receive_IT(&huart1, RxData, 1);
uint8_t TxData[] = "Hello World!\r\n";
HAL_UART_Transmit_DMA(&huart1, TxData, sizeof(TxData));
/* USER CODE END 2 */
while (1)
{
}
}
void USART1_IRQHandler(void)
{
/* USER CODE BEGIN USART1_IRQn 0 */
/* USER CODE END USART1_IRQn 0 */
HAL_UART_IRQHandler(&huart1);
/* USER CODE BEGIN USART1_IRQn 1 */
if (__HAL_UART_GET_IT(&huart1, UART_IT_RXNE) != RESET)
{
uint8_t data;
HAL_UART_Receive(&huart1, &data, 1, 0xFFFF);
// 处理接收到的数据
}
/* USER CODE END USART1_IRQn 1 */
}
void Error_Handler(void)
{
}
void SystemClock_Config(void)
{
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
/** Initializes the RCC Oscillators according to the specified parameters
* in the RCC_OscInitTypeDef structure.
*/
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI_DIV2;
RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL16;
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
{
Error_Handler();
}
/** Initializes the CPU, AHB and APB buses clocks
*/
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK)
{
Error_Handler();
}
}
```
相关推荐
![rar](https://img-home.csdnimg.cn/images/20210720083606.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![rar](https://img-home.csdnimg.cn/images/20210720083606.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)