arduino串口数据通过modbus库传输例程
时间: 2023-06-02 12:01:32 浏览: 90
以下是Arduino串口数据通过Modbus库传输的例程:
```arduino
#include <ModbusMaster.h>
#include <SoftwareSerial.h>
// Define the software serial pins
SoftwareSerial mySerial(2,3); // RX, TX
// Define the modbus master
ModbusMaster node;
void setup() {
// Initialize the software serial
mySerial.begin(9600);
// Initialize the modbus master
node.begin(1, mySerial);
// Set the slave ID
node.setSlaveId(2);
}
void loop() {
// Read data from the serial port
if (Serial.available() > 0) {
// Read the data
int data = Serial.read();
// Write the data to the modbus slave
node.writeSingleRegister(0, data);
}
// Check if there is any data in the modbus buffer
if (node.available()) {
// Read the data from the modbus buffer
int data = node.read();
// Write the data to the serial port
Serial.write(data);
}
}
```
说明:
1. 首先需要引入ModbusMaster和SoftwareSerial库。
2. 创建一个SoftwareSerial对象,并指定RX和TX引脚。
3. 创建一个ModbusMaster对象,并指定从机地址。
4. 在setup函数中初始化SoftwareSerial和ModbusMaster对象。同时设置从机ID。
5. 在loop函数中,读取串口数据,并将数据写入到Modbus从机的寄存器中。
6. 检查ModbusMaster对象的缓冲区中是否有数据,如果有,读取数据并将其写入到串口中。
相关推荐
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)