两个串口如何分别使用QSerialport :: readyRead()接收数据
时间: 2024-06-06 13:09:49 浏览: 13
两个串口可以通过以下步骤分别使用QSerialPort::readyRead()接收数据:
1. 创建两个QSerialPort对象,分别对应于两个串口,设置对应的端口号、波特率、数据位、校验位等属性;
2. 将两个QSerialPort对象的readyRead()信号连接到槽函数中,用于接收数据;
3. 在槽函数中,通过sender()函数获取信号源,即哪个QSerialPort对象触发了readyRead()信号,然后使用QIODevice::bytesAvailable()和QIODevice::read()函数读取数据。
注意,两个串口的接收数据需要在不同的线程中执行,否则会引起阻塞。可以使用Qt的多线程机制,或者使用QSerialPort的waitForReadyRead()函数实现异步接收。
相关问题
两个串口如何分别使用QSerialport :: readyRead()接收数据,槽函数分别怎么写
对于两个串口分别接收数据,可以创建两个 QSerialPort 对象,并分别为它们绑定 readyRead() 信号,示例代码如下:
QSerialPort serialPort1;
QSerialPort serialPort2;
//设置串口1的端口号、波特率等参数
serialPort1.setPortName("COM1");
serialPort1.setBaudRate(QSerialPort::Baud9600);
serialPort1.setDataBits(QSerialPort::Data8);
serialPort1.setFlowControl(QSerialPort::NoFlowControl);
serialPort1.setParity(QSerialPort::NoParity);
serialPort1.setStopBits(QSerialPort::OneStop);
//设置串口2的端口号、波特率等参数
serialPort2.setPortName("COM2");
serialPort2.setBaudRate(QSerialPort::Baud9600);
serialPort2.setDataBits(QSerialPort::Data8);
serialPort2.setFlowControl(QSerialPort::NoFlowControl);
serialPort2.setParity(QSerialPort::NoParity);
serialPort2.setStopBits(QSerialPort::OneStop);
//分别为两个串口绑定 readyRead() 信号
connect(&serialPort1, SIGNAL(readyRead()), this, SLOT(serialPort1ReadyRead()));
connect(&serialPort2, SIGNAL(readyRead()), this, SLOT(serialPort2ReadyRead()));
然后,分别编写两个槽函数 serialPort1ReadyRead() 和 serialPort2ReadyRead(),来实现数据的接收处理,示例代码如下:
void MyClass::serialPort1ReadyRead()
{
QByteArray data = serialPort1.readAll();
// 处理接收到的数据 ...
}
void MyClass::serialPort2ReadyRead()
{
QByteArray data = serialPort2.readAll();
// 处理接收到的数据 ...
}
在两个槽函数中,可以用 readAll() 函数读取收到的数据,并在函数中进行处理。
两个串口如何分别使用readyRead()接收数据
对于两个串口,你需要分别实例化两个QSerialPort对象。然后分别连接到readyRead()信号和相应的槽函数。例如:
```python
import serial
# 实例化两个串口对象
sp1 = serial.Serial('/dev/ttyACM0', 9600)
sp2 = serial.Serial('/dev/ttyACM1', 9600)
# 连接到readyRead()信号的槽函数,分别接收数据
def read_from_port1():
while sp1.inWaiting() > 0:
data = sp1.readline()
print("Received from Port 1:", data)
def read_from_port2():
while sp2.inWaiting() > 0:
data = sp2.readline()
print("Received from Port 2:", data)
# 将信号和槽函数连接起来
sp1.readyRead.connect(read_from_port1)
sp2.readyRead.connect(read_from_port2)
```
注意,这是一个示例代码,请根据实际情况自行修改串口名称和波特率等参数。
相关推荐
![pdf](https://img-home.csdnimg.cn/images/20210720083512.png)
![pdf](https://img-home.csdnimg.cn/images/20210720083512.png)
![7z](https://img-home.csdnimg.cn/images/20210720083312.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)