用c语言写出在keil5中以STM32F103RCT6为芯片的程序,使其实现“通过按KEY0,点亮LED0”的功能。
时间: 2023-06-09 11:04:14 浏览: 50
好的,您所提出的问题是如何使用 C 语言在 Keil5 中编写程序,以使 STM32F103RCT6 芯片能够实现“通过按 KEY0 点亮 LED0”的功能。以下是一个简单的代码示例,可以实现您的要求:
#include "stm32f10x.h"
void GPIO_Configuration(void);
void Delay(__IO uint32_t nCount);
int main(void)
{
GPIO_Configuration();
while (1)
{
if(GPIO_ReadInputDataBit(GPIOA,GPIO_Pin_0) == 0)
{
Delay(50000);
GPIO_SetBits(GPIOB,GPIO_Pin_0);
}
else
{
GPIO_ResetBits(GPIOB,GPIO_Pin_0);
}
}
}
void GPIO_Configuration(void)
{
GPIO_InitTypeDef GPIO_InitStructure;
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA | RCC_APB2Periph_GPIOB, ENABLE);
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPD;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(GPIOA, &GPIO_InitStructure);
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
GPIO_Init(GPIOB, &GPIO_InitStructure);
}
void Delay(__IO uint32_t nCount)
{
while(nCount--){}
}
注意到这里使用了 GPIO_InitTypeDef 结构体来初始化 GPIOA 和 GPIOB 端口,可以小心地修改这些参数来适应您自己的应用需求。此外,还使用了一个简单的延迟函数 Delay() 来控制 LED 的闪烁时间。如果您对以上代码还有疑问或需要了解更多有关嵌入式系统编程的信息,请与我进行详细的讨论。