flag = (QUADSPI->SR & 0X0001)?1:0 ;是什么意思
时间: 2024-04-15 17:24:13 浏览: 9
这段代码是在使用STM32微控制器的QUADSPI外设时的一个位操作。QUADSPI->SR是QUADSPI外设的状态寄存器,通过与0x0001进行按位与操作,可以获取到状态寄存器的最低位的值。如果最低位为1,则将flag设置为1,否则设置为0。这个flag变量可能会在后续的代码中使用,用于判断QUADSPI外设的某种状态。
相关问题
flag = QUADSPI->SR & 0X0005 ;是什么意思
这段代码同样是在使用STM32微控制器的QUADSPI外设时的位操作。QUADSPI->SR是QUADSPI外设的状态寄存器,通过与0x0005进行按位与操作,可以获取到状态寄存器的特定位的值。具体来说,0x0005是一个16进制数,转换为二进制为0000 0000 0000 0101,其中的每一位代表了不同的状态或标志位。按位与操作将状态寄存器的值与0x0005进行按位与运算,结果保存在flag变量中。
flag变量将包含QUADSPI外设状态寄存器中的特定位信息。根据该位信息,你可以根据需要执行后续的操作,例如判断外设的状态或进行错误处理。具体的位含义需要查看STMicroelectronics提供的QUADSPI外设的文档或参考手册。
TIM4->SR=TIM4->SR&0XA1A0
& ~(1<<0);
This code clears the update interrupt flag (UIF) in the status register (SR) of timer 4. The bitmask "(1<<0)" is used to select the first bit, which corresponds to the UIF. By performing a bitwise NOT operation on this bitmask and then ANDing it with the SR, we clear the UIF bit while leaving all other bits unchanged. The result is then written back to the SR register. This code is typically used in the interrupt service routine (ISR) for timer 4, to acknowledge and clear the interrupt flag after the update event has been handled.