请翻译In normal mode, the chip operates as selected in the available registers. Any command may be loaded in normal mode, although not all (Low-power mode) registers are used in the Normal mode. All the LPM registers must be programmed in Normal mode as the SPI is not active in LPM. The Normal mode of the chip is used to operate the AMUX, communicate via the SPI, Interrupt the IC, wetting and sustain currents, as well as the thresholds available to use. The WAKE_B pin is asserted (low) in Normal mode and can be used to enable a power supply (ENABLE_B). Various fault detections are available in this mode including overvoltage, overtemperature, thermal warning, SPI errors, and Hash faults.
时间: 2024-04-19 09:29:27 浏览: 11
在正常模式下,芯片按照可用寄存器中选择的方式运行。在正常模式下可以加载任何命令,尽管并非所有的低功耗模式寄存器都在正常模式下使用。在低功耗模式下,所有的LPM寄存器必须在正常模式下进行编程,因为SPI在LPM中不活动。芯片的正常模式用于操作AMUX、通过SPI进行通信、中断IC、湿润和维持电流,以及可用的阈值。在正常模式下,WAKE_B引脚被设为低电平,并可用于启用电源(ENABLE_B)。该模式下提供了各种故障检测功能,包括过压、过温、热警告、SPI错误和哈希故障。
相关问题
翻译Device configuration register The device has various configuration settings that are global in nature. The configuration settings are as follows: • When the 33978 is in the overvoltage region, a Logic [0] on the VBATP OV bit limits the wetting current on all input channels to 2 mA and the 33978 will not be able to enter into the Low-power mode. A Logic [1] allows the device to operate normally even in the overvoltage region. The OV flag will be set when the device enters in the OV region, regardless the value of the VBATP OV bit. • WAKE_B can be used to enable an external power supply regulator to supply the VDDQ voltage rail. When the WAKE_B VDDQ check bit is a Logic [0], the WAKE_B pin is expected to be pulled-up internally or externally to VDDQ and VDDQ is expected to go low, therefore the 33978 does not wake-up on the falling edge of WAKE_B. A Logic [1], assumes the user is using an external pull-up to VBATP or VDDQ (when VDDQ is not expected to be off) and the IC wakes up on a falling edge of WAKE_B. • INT_B out is used to select how the INT_B pin operates when an interrupt occurs. The IC is able to pulse low [1] or latch low [0]. • Aconfig[1-0] is used to determine the method of selecting the AMUX output, either a SPI command or using a hardwired setup using SG[3-1]. • Inputs SP0-7 may be programmable for switch-to-battery or switch-to-ground. These inputs types are defined using the settings command. To set a SPn input for switch-to-battery, a logic [1] for the appropriate bit must be set. To set a SPn input for switch-toground, a logic [0] for the appropriate bit must be set. The MCU may change or update the programmable switch register via software at any time in Normal mode. Regardless of the setting, when the SPn input switch is closed a logic [1] is placed in the serial output response register.
设备配置寄存器
该设备具有多种全局性质的配置设置。配置设置如下:
• 当33978处于过压区域时,VBATP OV位为逻辑[0]将所有输入通道的润湿电流限制为2 mA,并且33978无法进入低功耗模式。逻辑[1]允许设备即使在过压区域正常运行。当设备进入过压区域时,OV标志将被设置,而不管VBATP OV位的值如何。
• WAKE_B可用于启用外部电源调节器来供应VDDQ电压轨。当WAKE_B VDDQ检查位为逻辑[0]时,预期WAKE_B引脚会被内部或外部拉高到VDDQ,并且预期VDDQ会变低,因此33978不会在WAKE_B下降沿唤醒。逻辑[1]假设用户正在使用外部上拉到VBATP或VDDQ(当不希望VDDQ关闭时),并且IC在WAKE_B下降沿唤醒。
• INT_B out用于在发生中断时选择INT_B引脚的操作方式。IC能够脉冲低电平[1]或锁定低电平[0]。
• Aconfig [1-0]用于确定选择AMUX输出的方法,可以是SPI命令或使用硬连线设置使用SG [3-1]。
• 输入SP0-7可以编程为切换至电池或切换至地。这些输入类型使用设置命令进行定义。要将SPn输入设置为切换至电池,必须设置相应位的逻辑[1]。要将SPn输入设置为切换至地,必须设置相应位的逻辑[0]。MCU可以在正常模式下随时通过软件更改或更新可编程开关寄存器。无论设置如何,当SPn输入开关闭合时,逻辑[1]将放置在串行输出响应寄存器中。
do you know the company adeo in France?
### 回答1:
Yes, Adeo is a French retail company that specializes in home improvement and DIY (Do-It-Yourself) products. It was founded in 1923 and is headquartered in Roubaix, France. The company operates several retail chains, including Leroy Merlin, Weldom, Zodio, and Bricoman, which have stores in various countries around the world. Adeo is one of the largest home improvement retailers in Europe and has a strong presence in the French market.
### 回答2:
是的,我知道法国的adeo公司。adeo是一家在法国本土有很高知名度的零售集团企业,也是欧洲重要的零售巨头之一。该公司在1999年成立,总部设在法国北部的里尔市。adeo公司以家居装饰和建材销售为主要业务,旗下拥有许多知名品牌,如Leroy Merlin、Weldom、Zodio等。经过多年的发展,adeo已经在法国本土拥有超过1000家门店,同时还在其他欧洲国家设立了分支机构。adeo公司致力于提供高质量、创新和可持续的产品,追求满足客户的需求和提升客户生活质量。它以其多样化的产品、优质的服务和竞争力的价格受到了消费者的青睐。adeo还非常注重企业社会责任,积极参与公益事业和环保活动。在法国,adeo公司在家居和建材市场上具有很强的竞争力,并且在欧洲市场上也有很大的影响力。
### 回答3:
是的,我知道在法国的Adeo公司。Adeo是世界领先的家居装饰和建筑材料零售集团之一。该公司总部位于法国北部的里尔,成立于1923年。Adeo通过不同的零售品牌,在全球超过15个国家经营着数千家店铺。其中最著名的品牌包括“Leroy Merlin”和“Brico Dépôt”。
Adeo公司致力于为消费者提供各种家居装饰和建筑材料产品。他们销售包括室内家具、灯具、厨房和卫浴配件、地板和墙壁材料等等。通过不断创新和引入新产品,Adeo公司在市场上享有很高的声誉。
除了在零售领域,Adeo公司还在可持续发展方面积极投入。他们采取了一系列的措施,包括减少能源消耗和环境影响,以及提供可再生能源解决方案。这使得Adeo公司成为可持续发展的领导者之一。
总的来说,Adeo公司是一家在法国拥有很高知名度的家居装饰和建筑材料零售集团。他们通过多个品牌在全球范围内经营着数千家店铺,并致力于为消费者提供各种高质量的产品。与此同时,他们还积极投入可持续发展领域,成为环保和创新的推动者。