用C写一个给串口发数据并接收串口回包的demo
时间: 2024-05-04 14:15:30 浏览: 7
好的,以下是给串口发数据并接收串口回包的demo:
```c
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <fcntl.h>
#include <termios.h>
#include <unistd.h>
int main(int argc, char *argv[])
{
int fd;
struct termios tty;
// 打开串口设备
fd = open(argv[1], O_RDWR | O_NOCTTY);
if (fd < 0) {
perror("open");
return -1;
}
// 获取并修改串口属性
if (tcgetattr(fd, &tty) != 0) {
perror("tcgetattr");
exit(-1);
}
cfsetospeed(&tty, B115200); // 设置串口波特率为115200
cfsetispeed(&tty, B115200);
tty.c_cflag &= ~CSIZE;
tty.c_cflag |= CS8; // 设置数据位为8
tty.c_cflag &= ~PARENB; // 设置无校验
tty.c_cflag &= ~CSTOPB; // 设置停止位为1
tty.c_cflag &= ~CRTSCTS; // 关闭硬件流控
tty.c_lflag &= ~(ICANON | ECHO | ECHOE | ISIG);
tty.c_iflag &= ~(IXON | IXOFF | IXANY); // 关闭软件流控
tty.c_oflag &= ~OPOST;
if (tcsetattr(fd, TCSANOW, &tty) != 0) {
perror("tcsetattr");
exit(-1);
}
// 发送数据并接收回包
char buf[256];
int n;
memset(buf, 0, sizeof(buf)); // 清空缓冲区
printf("Sending data...\n");
n = write(fd, "hello world!", 12); // 向串口发送数据
if (n < 0) {
perror("write");
return -1;
}
sleep(1); // 等待一段时间,确保数据发送完毕并接收回包
printf("Receiving data...\n");
n = read(fd, buf, sizeof(buf)); // 从串口读取回包
if (n < 0) {
perror("read");
return -1;
}
printf("Received data: %s\n", buf);
// 关闭串口设备
close(fd);
return 0;
}
```
请注意,这只是一个简单的示例程序,并未考虑错误处理等问题,实际应用中可能需要进行更多细节处理。