USART_ITConfig(serial_config->serial_periph,USART_IT_TC,DISABLE);
时间: 2023-11-01 15:06:30 浏览: 38
这是一个函数调用语句,调用了USART_ITConfig函数来配置USART的中断功能。其中,serial_config->serial_periph表示USART的外设标识符,这里使用了指向结构体的指针serial_config中的成员变量serial_periph;USART_IT_TC表示USART的发送完成中断类型;DISABLE表示禁用该中断。该语句的作用是禁用USART的发送完成中断,以便在USART发送完成时不再触发中断服务函数进行相应处理。注意,该函数需要在禁用中断之前调用,以确保中断的正确性和可靠性。
相关问题
写一个USART_UX_IRQHandler()的应用实例
USART_UX_IRQHandler() 是一个中断处理程序,通常用于处理微控制器中 USART 模块的中断事件。下面是一个简单的应用实例,展示了如何使用 USART_UX_IRQHandler() 中断处理程序来实现串口通信。
假设我们正在使用 STM32F4xx 微控制器,并且想要通过串口与计算机进行通信。我们可以使用 USART3 模块作为串口,使用 DMA2 缓冲区来实现数据的传输。
在代码中,我们需要使用以下函数来初始化 USART3 和 DMA2:
```
void USART3_Init(void)
{
// Enable USART3 clock
RCC_APB1PeriphClockCmd(RCC_APB1Periph_USART3, ENABLE);
// Configure USART3 pins
GPIO_InitTypeDef GPIO_InitStruct;
GPIO_InitStruct.GPIO_Pin = GPIO_Pin_10 | GPIO_Pin_11;
GPIO_InitStruct.GPIO_Mode = GPIO_Mode_AF;
GPIO_InitStruct.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStruct.GPIO_OType = GPIO_OType_PP;
GPIO_InitStruct.GPIO_PuPd = GPIO_PuPd_UP;
GPIO_Init(GPIOB, &GPIO_InitStruct);
GPIO_PinAFConfig(GPIOB, GPIO_PinSource10, GPIO_AF_USART3);
GPIO_PinAFConfig(GPIOB, GPIO_PinSource11, GPIO_AF_USART3);
// Configure USART3
USART_InitTypeDef USART_InitStruct;
USART_InitStruct.USART_BaudRate = 115200;
USART_InitStruct.USART_WordLength = USART_WordLength_8b;
USART_InitStruct.USART_StopBits = USART_StopBits_1;
USART_InitStruct.USART_Parity = USART_Parity_No;
USART_InitStruct.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
USART_InitStruct.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
USART_Init(USART3, &USART_InitStruct);
// Enable USART3
USART_Cmd(USART3, ENABLE);
}
void DMA2_Init(void)
{
// Enable DMA2 clock
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_DMA2, ENABLE);
// Configure DMA2
DMA_InitTypeDef DMA_InitStruct;
DMA_InitStruct.DMA_Channel = DMA_Channel_4;
DMA_InitStruct.DMA_PeripheralBaseAddr = (uint32_t)&USART3->DR;
DMA_InitStruct.DMA_Memory0BaseAddr = (uint32_t)dmaBuffer;
DMA_InitStruct.DMA_DIR = DMA_DIR_PeripheralToMemory;
DMA_InitStruct.DMA_BufferSize = DMA_BUFFER_SIZE;
DMA_InitStruct.DMA_PeripheralInc = DMA_PeripheralInc_Disable;
DMA_InitStruct.DMA_MemoryInc = DMA_MemoryInc_Enable;
DMA_InitStruct.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte;
DMA_InitStruct.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte;
DMA_InitStruct.DMA_Mode = DMA_Mode_Circular;
DMA_InitStruct.DMA_Priority = DMA_Priority_High;
DMA_InitStruct.DMA_FIFOMode = DMA_FIFOMode_Disable;
DMA_InitStruct.DMA_FIFOThreshold = DMA_FIFOThreshold_HalfFull;
DMA_InitStruct.DMA_MemoryBurst = DMA_MemoryBurst_Single;
DMA_InitStruct.DMA_PeripheralBurst = DMA_PeripheralBurst_Single;
DMA_Init(DMA2_Stream1, &DMA_InitStruct);
// Enable DMA2 Stream1
DMA_Cmd(DMA2_Stream1, ENABLE);
// Enable DMA2 Stream1 transfer complete interrupt
DMA_ITConfig(DMA2_Stream1, DMA_IT_TC, ENABLE);
}
```
在 main() 函数中,我们需要启用 USART3 和 DMA2,并在初始化完成后启用全局中断:
```
int main(void)
{
USART3_Init();
DMA2_Init();
// Enable global interrupts
NVIC_PriorityGroupConfig(NVIC_PriorityGroup_4);
NVIC_InitTypeDef NVIC_InitStruct;
NVIC_InitStruct.NVIC_IRQChannel = DMA2_Stream1_IRQn;
NVIC_InitStruct.NVIC_IRQChannelPreemptionPriority = 0;
NVIC_InitStruct.NVIC_IRQChannelSubPriority = 0;
NVIC_InitStruct.NVIC_IRQChannelCmd = ENABLE;
NVIC_Init(&NVIC_InitStruct);
while (1)
{
// Do some other stuff here
}
}
```
最后,我们需要实现 USART_UX_IRQHandler() 中断处理程序,以便在 USART3 接收到数据时进行处理:
```
void USART3_IRQHandler(void)
{
if (USART_GetITStatus(USART3, USART_IT_RXNE) != RESET)
{
char data = USART_ReceiveData(USART3);
// Do something with received data
USART_ClearITPendingBit(USART3, USART_IT_RXNE);
}
}
void DMA2_Stream1_IRQHandler(void)
{
if (DMA_GetITStatus(DMA2_Stream1, DMA_IT_TCIF1) != RESET)
{
// Do something with received data in DMA buffer
DMA_ClearITPendingBit(DMA2_Stream1, DMA_IT_TCIF1);
}
}
```
在 USART_UX_IRQHandler() 中断处理程序中,我们首先检查 USART3 是否接收到数据,如果有则读取数据并进行处理。在 DMA2_Stream1_IRQHandler() 中断处理程序中,我们检查 DMA2 是否已经传输完毕,如果是则处理 DMA 缓冲区中的数据。
这样,我们就可以使用 USART_UX_IRQHandler() 中断处理程序来实现串口通信。
#include "stm32f10x.h"#include "stdio.h"#define RX_BUFFER_SIZE 9uint8_t rx_buffer[RX_BUFFER_SIZE];uint8_t rx_index = 0;void USART1_Init(void){ GPIO_InitTypeDef GPIO_InitStructure; USART_InitTypeDef USART_InitStructure; // 打开USART1和GPIOA时钟 RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1 | RCC_APB2Periph_GPIOA, ENABLE); // 配置USART1的GPIO引脚 GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9; GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; GPIO_Init(GPIOA, &GPIO_InitStructure); GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10; GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; GPIO_Init(GPIOA, &GPIO_InitStructure); // 配置USART1的通信参数 USART_InitStructure.USART_BaudRate = 9600; USART_InitStructure.USART_WordLength = USART_WordLength_8b; USART_InitStructure.USART_StopBits = USART_StopBits_1; USART_InitStructure.USART_Parity = USART_Parity_No; USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None; USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx; USART_Init(USART1, &USART_InitStructure); // 打开USART1 USART_Cmd(USART1, ENABLE);}void USART1_IRQHandler(void){ if (USART_GetITStatus(USART1, USART_IT_RXNE) == SET) { uint8_t data = USART_ReceiveData(USART1); if (rx_index < RX_BUFFER_SIZE) { rx_buffer[rx_index++] = data; } if (rx_index == RX_BUFFER_SIZE) { USART_ITConfig(USART1, USART_IT_RXNE, DISABLE); } }}int main(void){ USART1_Init(); while (1) { // 发送查询指令 USART_SendData(USART1, 0xFF); USART_SendData(USART1, 0x01); USART_SendData(USART1, 0x86); USART_SendData(USART1, 0x00); USART_SendData(USART1, 0x00); USART_SendData(USART1, 0x00); USART_SendData(USART1, 0x00); USART_SendData(USART1, 0x00); USART_SendData(USART1, 0x79); // 等待数据接收完成 rx_index = 0; USART_ITConfig(USART1, USART_IT_RXNE, ENABLE); while (rx_index < RX_BUFFER_SIZE); // 计算甲醛浓度 uint16_t ch2o_raw = (rx_buffer[2] << 8) | rx_buffer[3]; float ch2o_conc = ch2o_raw / 1000.0; // 显示甲醛浓度 printf("CH2O Concentration: %.3f mg/m3\r\n", ch2o_conc); // 等待一段时间后再进行下一次检测 delay_ms(1000); }}void delay_ms(uint32_t ms){ uint32_t i, j; for (i = 0; i < ms; i++) for (j = 0; j < 2000; j++);}代码中串口是不是错了,应该是usart3吧
是的,你说得对,代码中的串口定义应该改为USART3,如下所示:
```c
#include "stm32f10x.h"
#include "stdio.h"
#define RX_BUFFER_SIZE 9
uint8_t rx_buffer[RX_BUFFER_SIZE];
uint8_t rx_index = 0;
void USART3_Init(void)
{
GPIO_InitTypeDef GPIO_InitStructure;
USART_InitTypeDef USART_InitStructure;
// 打开USART3和GPIOB时钟
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE);
RCC_APB1PeriphClockCmd(RCC_APB1Periph_USART3, ENABLE);
// 配置USART3的GPIO引脚
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(GPIOB, &GPIO_InitStructure);
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_11;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(GPIOB, &GPIO_InitStructure);
// 配置USART3的通信参数
USART_InitStructure.USART_BaudRate = 9600;
USART_InitStructure.USART_WordLength = USART_WordLength_8b;
USART_InitStructure.USART_StopBits = USART_StopBits_1;
USART_InitStructure
相关推荐
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)