STM32L496 IIC
时间: 2024-06-20 10:03:52 浏览: 12
STM32L496 是意法半导体推出的低功耗、高性能的微控制器,支持多种通信接口,其中就包括 IIC 接口。IIC 接口也称为 I2C 接口,是一种串行通信接口,常用于连接微控制器和各种外设芯片。
STM32L496 的 IIC 接口提供了多种工作模式和数据传输速率的选择,可以满足不同应用场景的需求。其主要特点包括:
1. 支持标准(100 kbps)和快速(400 kbps)模式;
2. 支持主机和从机模式;
3. 支持多主机并行传输;
4. 可以设置 IIC 地址;
5. 支持 DMA 传输;
6. 支持中断和轮询方式。
如果您需要更详细的介绍,可以参考STM32L496官方文档中的相关章节。
相关问题
STM32L496 IIC配置
STM32L496是一款基于ARM Cortex-M4内核的微控制器,它支持多种外设,包括IIC总线接口。下面是STM32L496 IIC配置的步骤:
1. 使能IIC时钟:在RCC寄存器中设置I2C时钟使能位(I2C1EN或I2C3EN)。
2. 配置GPIO:将SCL和SDA引脚配置为复用模式,并设置对应的GPIO输出类型、输出速度和上拉电阻。
3. 配置IIC参数:在I2C控制器的CR1寄存器中设置IIC模式、时钟频率、ACK使能等参数。
4. 使能IIC:在I2C控制器的CR1寄存器中设置PE位,使能IIC总线。
5. 发送起始信号:在I2C控制器的CR1寄存器中设置START位,发送起始信号。
6. 发送从设备地址:在I2C控制器的DR寄存器中写入从设备地址和读写方向位(0为写,1为读)。
7. 等待ACK:等待从设备发送ACK信号。
8. 发送数据或接收数据:在I2C控制器的DR寄存器中写入要发送的数据或读取接收到的数据。
9. 发送停止信号:在I2C控制器的CR1寄存器中设置STOP位,发送停止信号。
STM32软件模拟IIC
STM32可以使用软件模拟IIC(I2C)协议,实现与其他I2C设备的通信。以下是实现软件模拟IIC的基本步骤:
1.配置GPIO引脚:使用两个GPIO引脚模拟I2C总线的SDA和SCL信号。可以使用STM32的GPIO库函数来配置GPIO引脚。
2.编写软件模拟IIC的驱动程序:实现IIC协议的START、STOP、ACK、NACK、发送和接收数据等操作。可以使用STM32的定时器和延时函数来控制SCL的时钟周期。
3.测试软件模拟IIC:编写测试程序,使用软件模拟IIC与其他I2C设备进行通信,例如读取温度传感器的数据。
下面是一个示例代码,实现软件模拟IIC向I2C设备发送数据:
```
#define SDA_H GPIO_SetBits(GPIOB,GPIO_Pin_6)
#define SDA_L GPIO_ResetBits(GPIOB,GPIO_Pin_6)
#define SCL_H GPIO_SetBits(GPIOB,GPIO_Pin_7)
#define SCL_L GPIO_ResetBits(GPIOB,GPIO_Pin_7)
#define SDA_read GPIO_ReadInputDataBit(GPIOB,GPIO_Pin_6)
void IIC_init(void)
{
GPIO_InitTypeDef GPIO_InitStructure;
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE);
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_6 | GPIO_Pin_7;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_OD;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(GPIOB, &GPIO_InitStructure);
SDA_H;
SCL_H;
}
void IIC_Start(void)
{
SDA_H;
SCL_H;
delay_us(4);
SDA_L;
delay_us(4);
SCL_L;
}
void IIC_Stop(void)
{
SDA_L;
SCL_H;
delay_us(4);
SDA_H;
delay_us(4);
}
void IIC_SendByte(uint8_t byte)
{
uint8_t i = 0;
for(i=0; i<8; i++)
{
if(byte & 0x80)
SDA_H;
else
SDA_L;
byte <<= 1;
SCL_H;
delay_us(2);
SCL_L;
delay_us(2);
}
}
uint8_t IIC_WaitAck(void)
{
uint8_t re;
SDA_H;
delay_us(1);
SCL_H;
delay_us(1);
if(SDA_read)
re = 1;
else
re = 0;
SCL_L;
delay_us(1);
return re;
}
void IIC_SendACK(uint8_t ack)
{
if(ack)
SDA_H;
else
SDA_L;
SCL_H;
delay_us(2);
SCL_L;
delay_us(2);
}
void IIC_SendData(uint8_t addr, uint8_t reg, uint8_t byte)
{
IIC_Start();
IIC_SendByte(addr<<1);
IIC_WaitAck();
IIC_SendByte(reg);
IIC_WaitAck();
IIC_SendByte(byte);
IIC_WaitAck();
IIC_Stop();
}
```
在上面的代码中,使用GPIOB6和GPIOB7模拟I2C总线的SDA和SCL信号。IIC_init函数初始化GPIO引脚。IIC_Start、IIC_Stop、IIC_SendByte、IIC_WaitAck和IIC_SendACK实现I2C协议的START、STOP、ACK、NACK等操作。IIC_SendData函数实现向I2C设备发送数据。
以上是一个简单的软件模拟IIC的实现,具体实现需要根据实际需求进行调整。
相关推荐
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![pdf](https://img-home.csdnimg.cn/images/20210720083512.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)