写一个关于stm32f4的一个10ms的计时器
时间: 2023-06-06 21:08:46 浏览: 49
好的,以下是一个关于STM32F4的10ms计时器的代码示例:
```
#include "stm32f4xx.h"
volatile uint32_t sysTickMs;
void SysTick_Handler(void) {
sysTickMs++;
}
void initSysTick(void) {
SysTick_Config(SystemCoreClock / 1000);
}
int main(void) {
initSysTick();
while(1) {
if(sysTickMs % 10 == 0) {
// 每10ms执行一次
// 在这里写你要执行的代码
}
}
}
```
这个代码使用STM32F4的SysTick计时器(系统滴答定时器)来实现10ms的计时。在程序的主循环中,如果当前时间是10ms的整数倍,则执行你要执行的代码。请注意,具体要执行的代码要根据你的具体应用场景进行编写。
相关问题
用库函数写一个关于stm32f4的一个10ms的计时器
Sure, I can help you write a 10ms timer for stm32f4 using library functions. Here is an example code snippet in C:
```
#include "stm32f4xx.h"
#include "stm32f4xx_hal.h"
void TIM_Config(void);
void delay_ms(uint32_t ms);
int main(void) {
HAL_Init();
TIM_Config();
while(1) {
delay_ms(100); // wait for 100 ms
}
}
void TIM_Config(void) {
TIM_HandleTypeDef htim;
TIM_OC_InitTypeDef sConfigOC;
// enable clock for TIM2
__HAL_RCC_TIM2_CLK_ENABLE();
// set the timer base configuration
htim.Instance = TIM2;
htim.Init.Prescaler = (uint32_t)(SystemCoreClock / 10000) - 1;
htim.Init.CounterMode = TIM_COUNTERMODE_UP;
htim.Init.Period = 10 - 1; // 10ms timer
// initialize TIM2
HAL_TIM_Base_Init(&htim);
// configure the timer channel as output compare
sConfigOC.OCMode = TIM_OCMODE_ACTIVE;
sConfigOC.Pulse = 0;
sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
HAL_TIM_OC_ConfigChannel(&htim, &sConfigOC, TIM_CHANNEL_1);
// start the timer
HAL_TIM_Base_Start(&htim);
HAL_TIM_OC_Start(&htim, TIM_CHANNEL_1);
}
void delay_ms(uint32_t ms) {
// wait for ms milliseconds
uint32_t start = HAL_GetTick();
while(HAL_GetTick() - start < ms);
}
```
This code configures the STM32F4 Timer 2 to fire every 10ms using the HAL library functions. The `delay_ms()` function uses the HAL `HAL_GetTick()` function to wait for a specified number of milliseconds. Note that this code assumes that you have already set up your IO pins for timer output as appropriate. Let me know if you have any further questions!
用标准库函数写一个关于stm32f4的一个10ms的计时器
好的,关于 STM32F4 的 10 毫秒计时器,您可以使用 STM32F4 的定时器模块实现。以下是一个基本框架:
首先,配置时钟,选择一个定时器模块,然后将其分频以获得您的期望计时器时间。
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOD, ENABLE);
GPIO_InitTypeDef GPIO_InitStructure;
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_13;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT;
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_100MHz;
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
GPIO_Init(GPIOD, &GPIO_InitStructure);
SystemCoreClockUpdate();
TIM_TimeBaseInitTypeDef base_timer;
TIM_TimeBaseStructInit(&base_timer);
uint16_t prescaler = (uint16_t)((SystemCoreClock / 2) / 10000) - 1; // 10ms
base_timer.TIM_Prescaler = prescaler;
base_timer.TIM_CounterMode = TIM_CounterMode_Up;
base_timer.TIM_Period = 10000 - 1; // 10ms
base_timer.TIM_ClockDivision = TIM_CKD_DIV1;
base_timer.TIM_RepetitionCounter = 0;
TIM_TimeBaseInit(TIM2, &base_timer);
TIM_Cmd(TIM2, ENABLE);
while(1)
{
if (TIM_GetITStatus(TIM2, TIM_IT_Update) != RESET)
{
TIM_ClearITPendingBit(TIM2, TIM_IT_Update);
// 插入实际操作代码
// 可选:在计时器周期内使用 LED
GPIO_ToggleBits(GPIOD, GPIO_Pin_13);
}
}
以上代码创建了一个计时器,每10毫秒中断一次并执行打开/关闭 LED 的操作。您可以替换 GPIO 操作来改变计时器中断的操作,例如向串口发送数据等等。