#include<stdio.h> #include"string.h" int main() { char st[30],cs[6][30]; int i,j,p; printf("input country name:\n"); for(i=0;i<6;i++) gets(cs[i]); printf("\n"); for(i=0;i<6;i++) { p=i; strcpy(st,cs[i]); for(j=i+1;j<6;j++) if(strcmp(cs[j],st)<0) { p=j; strcpy(st,cs[j]); } if(p!=i) { strcpy(st,cs[i]); strcpy(cs[i],cs[p]); strcpy(cs[p],st); } puts(cs[i]); } printf("\n"); return 0; }分析
时间: 2024-01-04 22:02:04 浏览: 31
这段代码实现的功能是输入6个国家名称,然后按字母顺序排序输出。具体分析如下:
1. 定义了一个字符数组st和一个二维字符数组cs,st用于临时存储排序时的最小值,cs用于存储6个国家名称。
2. 使用循环语句for,输入6个国家名称,使用gets函数获取用户输入的字符串,存储到cs数组中。
3. 再次使用循环语句for,外层循环用于遍历cs数组中的每一个元素,内层循环用于比较当前元素和后面所有元素的大小,找到最小值并记录其下标。
4. 如果找到的最小值不是当前元素,就将它们的值进行交换。
5. 最后使用puts函数输出排好序的国家名称。
6. 整个程序结束并返回0。
需要注意的是,这段代码使用了gets函数获取用户输入,由于gets函数存在缓冲区溢出的风险,因此建议使用更安全的fgets函数进行输入。
相关问题
修改这段代码的错误#include <stdio.h>#include <stdlib.h>#include <string.h>#include <unistd.h>#include <fcntl.h>#include <termios.h>int main(){ int fd; struct termios options; // 打开串口设备 fd = open("/dev/ttyS1", O_RDWR | O_NOCTTY | O_NDELAY); if (fd < 0) { perror("open"); exit(1); } // 获取当前串口属性 tcgetattr(fd, &options); // 设置波特率为9600 cfsetispeed(&options, B9600); cfsetospeed(&options, B9600); // 设置数据位为8,停止位为1,偶校验 options.c_cflag |= PARENB; // 启用偶校验 options.c_cflag &= ~PARODD; // 设置为偶校验 options.c_cflag &= ~CSTOPB; // 设置停止位为1 options.c_cflag &= ~CSIZE; options.c_cflag |= CS8; // 应用新的串口属性 tcsetattr(fd, TCSANOW, &options); printf("Serial port initialized.\n"); // 读取串口数据 char buf[256]; while (1) { int len = read(fd, buf, sizeof(buf)); if (len > 0) { buf[len] = '\0'; printf("Received: %s\n", buf); } usleep(10000); // 等待10ms } // 关闭串口设备 close(fd); return 0;}
这段代码本身并没有明显的错误,但是缺少了注释和代码结构,不太易读和易懂。以下是经过修改后的代码,增加了注释和代码结构,更易读和易懂:
```c
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <fcntl.h>
#include <termios.h>
int main()
{
int fd; // 串口设备句柄
struct termios options; // 串口属性结构体
// 打开串口设备
fd = open("/dev/ttyS1", O_RDWR | O_NOCTTY | O_NDELAY);
if (fd < 0) {
perror("open");
exit(1);
}
// 获取当前串口属性
tcgetattr(fd, &options);
// 设置波特率为9600
cfsetispeed(&options, B9600);
cfsetospeed(&options, B9600);
// 设置数据位为8,停止位为1,偶校验
options.c_cflag |= PARENB; // 启用偶校验
options.c_cflag &= ~PARODD; // 设置为偶校验
options.c_cflag &= ~CSTOPB; // 设置停止位为1
options.c_cflag &= ~CSIZE;
options.c_cflag |= CS8;
// 应用新的串口属性
tcsetattr(fd, TCSANOW, &options);
printf("Serial port initialized.\n");
// 读取串口数据
char buf[256];
while (1) {
int len = read(fd, buf, sizeof(buf));
if (len > 0) {
buf[len] = '\0';
printf("Received: %s\n", buf);
}
usleep(10000); // 等待10ms
}
// 关闭串口设备
close(fd);
return 0;
}
```
请注意,这只是一种修改方式,不一定是最优解。在实际开发中,应该根据具体情况选择最适合自己的代码结构和注释方式。
#include <stdio.h> #include <stdlib.h> #include <fcntl.h> #include <unistd.h> #include <termios.h> #include <string.h> int main() { int serial_port; char* serial_port_path = "/dev/ttyS0"; // 串口设备路径,请根据实际情况修改 // 打开串口 serial_port = open(serial_port_path, O_RDWR); if (serial_port < 0) { perror("Failed to open serial port"); exit(1); } // 配置串口参数 struct termios serial_settings; tcgetattr(serial_port, &serial_settings); cfsetispeed(&serial_settings, B9600); // 设置波特率为9600 cfsetospeed(&serial_settings, B9600); serial_settings.c_cflag &= ~PARENB; // 禁用奇偶校验 serial_settings.c_cflag &= ~CSTOPB; // 设置停止位为1位 serial_settings.c_cflag &= ~CSIZE; // 清除数据位设置 serial_settings.c_cflag |= CS8; // 设置数据位为8位 tcsetattr(serial_port, TCSANOW, &serial_settings); // 发送数据 char* message = "Hello, serial port!"; write(serial_port, message, strlen(message)); // 接收数据 char buffer[256]; int bytes_read = read(serial_port, buffer, sizeof(buffer)); buffer[bytes_read] = '\0'; printf("Received from serial port: %s\n", buffer); // 关闭串口 close(serial_port); return 0; }
这是一个使用C语言编写的串口通信程序示例。以下是程序的主要步骤:
1. 引入所需的头文件:stdio.h、stdlib.h、fcntl.h、unistd.h、termios.h和string.h。
2. 定义一个整型变量serial_port,用于存储串口文件描述符。
3. 定义一个字符指针变量serial_port_path,用于指定串口设备的路径。请根据实际情况修改该路径。
4. 使用open函数打开串口设备,并将返回的文件描述符存储在serial_port变量中。如果打开失败,输出错误信息并退出程序。
5. 使用tcgetattr函数获取当前串口的配置参数,并将其存储在struct termios类型的变量serial_settings中。
6. 使用cfsetispeed和cfsetospeed函数将串口的输入和输出波特率设置为9600。
7. 使用位运算符设置串口的奇偶校验位、停止位和数据位。在示例中,禁用奇偶校验、设置停止位为1位,并设置数据位为8位。
8. 使用tcsetattr函数将修改后的串口配置参数应用到串口设备。
9. 定义一个字符指针变量message,存储要发送的数据。
10. 使用write函数向串口发送数据。
11. 定义一个字符数组buffer,用于接收从串口读取的数据。
12. 使用read函数从串口读取数据,并将读取到的字节数存储在变量bytes_read中。
13. 将buffer数组的末尾设置为字符串结束符'\0',然后使用printf函数打印接收到的数据。
14. 使用close函数关闭串口。
15. 返回0,表示程序成功执行完毕。
请注意,这只是一个基本的示例,实际应用中可能需要根据具体需求进行修改和扩展。同时,需要注意在编译和运行程序时,确保你有足够的权限来访问串口设备文件。
相关推荐
![docx](https://img-home.csdnimg.cn/images/20210720083331.png)
![docx](https://img-home.csdnimg.cn/images/20210720083331.png)
![docx](https://img-home.csdnimg.cn/images/20210720083331.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)