#define SDA_H(x,y) GPIO_SetBits(GPIO##x,GPIO_Pin_##y)
时间: 2024-06-01 11:09:01 浏览: 12
这是一个宏定义,它的作用是设置特定GPIO引脚的输出电平为高电平。
其中,##是一个预处理运算符,它的作用是将x和y连接成一个单独的标识符。例如,如果x为A,y为1,则##运算符将它们连接成GPIOA和GPIO_Pin_1。
GPIO_SetBits是一个函数,它的作用是设置特定GPIO引脚的输出电平为高电平。在这个宏定义中,它被调用来完成具体的操作。
相关问题
写stm32GPIO模拟IIC代码
我可以回答这个问题。以下是一个基本的STM32 GPIO模拟IIC代码示例:
```
#include "stm32f10x.h"
#define SDA_PIN GPIO_Pin_7
#define SCL_PIN GPIO_Pin_6
#define IIC_PORT GPIOB
void IIC_Init(void)
{
GPIO_InitTypeDef GPIO_InitStructure;
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE);
GPIO_InitStructure.GPIO_Pin = SDA_PIN | SCL_PIN;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_OD;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(IIC_PORT, &GPIO_InitStructure);
GPIO_SetBits(IIC_PORT, SDA_PIN | SCL_PIN);
}
void IIC_Start(void)
{
GPIO_SetBits(IIC_PORT, SDA_PIN | SCL_PIN);
GPIO_ResetBits(IIC_PORT, SDA_PIN);
GPIO_ResetBits(IIC_PORT, SCL_PIN);
}
void IIC_Stop(void)
{
GPIO_ResetBits(IIC_PORT, SDA_PIN);
GPIO_SetBits(IIC_PORT, SCL_PIN);
GPIO_SetBits(IIC_PORT, SDA_PIN);
}
void IIC_SendByte(uint8_t byte)
{
uint8_t i;
for (i = 0; i < 8; i++)
{
if (byte & 0x80)
GPIO_SetBits(IIC_PORT, SDA_PIN);
else
GPIO_ResetBits(IIC_PORT, SDA_PIN);
GPIO_SetBits(IIC_PORT, SCL_PIN);
GPIO_ResetBits(IIC_PORT, SCL_PIN);
byte <<= 1;
}
}
uint8_t IIC_ReadByte(void)
{
uint8_t i, byte = 0;
GPIO_SetBits(IIC_PORT, SDA_PIN);
for (i = 0; i < 8; i++)
{
byte <<= 1;
GPIO_SetBits(IIC_PORT, SCL_PIN);
if (GPIO_ReadInputDataBit(IIC_PORT, SDA_PIN))
byte |= 0x01;
GPIO_ResetBits(IIC_PORT, SCL_PIN);
}
return byte;
}
uint8_t IIC_WriteByte(uint8_t addr, uint8_t reg, uint8_t data)
{
IIC_Start();
IIC_SendByte(addr << 1);
if (!IIC_WaitAck())
{
IIC_Stop();
return 1;
}
IIC_SendByte(reg);
if (!IIC_WaitAck())
{
IIC_Stop();
return 1;
}
IIC_SendByte(data);
if (!IIC_WaitAck())
{
IIC_Stop();
return 1;
}
IIC_Stop();
return 0;
}
uint8_t IIC_ReadByte(uint8_t addr, uint8_t reg, uint8_t *data)
{
IIC_Start();
IIC_SendByte(addr << 1);
if (!IIC_WaitAck())
{
IIC_Stop();
return 1;
}
IIC_SendByte(reg);
if (!IIC_WaitAck())
{
IIC_Stop();
return 1;
}
IIC_Start();
IIC_SendByte((addr << 1) | 0x01);
if (!IIC_WaitAck())
{
IIC_Stop();
return 1;
}
*data = IIC_ReadByte();
IIC_Stop();
return 0;
}
uint8_t IIC_WaitAck(void)
{
uint8_t i;
GPIO_SetBits(IIC_PORT, SDA_PIN);
GPIO_SetBits(IIC_PORT, SCL_PIN);
for (i = 0; i < 200; i++)
{
if (!GPIO_ReadInputDataBit(IIC_PORT, SDA_PIN))
{
GPIO_ResetBits(IIC_PORT, SCL_PIN);
return 1;
}
}
GPIO_ResetBits(IIC_PORT, SCL_PIN);
return 0;
}
```
这是一个基本的STM32 GPIO模拟IIC代码示例,可以根据需要进行修改和优化。
用stm32点亮爱心8*8led点阵
以下是一个简单的例子,使用STM32的GPIO口控制8*8 LED点阵。您可以根据自己的需求进行修改。
```c
#include "stm32f10x.h"
// 定义引脚
#define LED_LAT_GPIO GPIOA
#define LED_LAT_PIN GPIO_Pin_0
#define LED_OE_GPIO GPIOA
#define LED_OE_PIN GPIO_Pin_1
#define LED_SCLK_GPIO GPIOA
#define LED_SCLK_PIN GPIO_Pin_2
#define LED_SDA_GPIO GPIOA
#define LED_SDA_PIN GPIO_Pin_3
// 控制LED点阵的函数
void led_write_byte(unsigned char dat)
{
unsigned char i;
for (i = 0; i < 8; i++)
{
if (dat & 0x80)
{
GPIO_SetBits(LED_SDA_GPIO, LED_SDA_PIN);
}
else
{
GPIO_ResetBits(LED_SDA_GPIO, LED_SDA_PIN);
}
dat <<= 1;
GPIO_ResetBits(LED_SCLK_GPIO, LED_SCLK_PIN);
GPIO_SetBits(LED_SCLK_GPIO, LED_SCLK_PIN);
}
}
void led_write(unsigned char address, unsigned char dat)
{
GPIO_ResetBits(LED_LAT_GPIO, LED_LAT_PIN);
led_write_byte(address);
led_write_byte(dat);
GPIO_SetBits(LED_LAT_GPIO, LED_LAT_PIN);
}
void led_init()
{
GPIO_InitTypeDef GPIO_InitStructure;
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE);
GPIO_InitStructure.GPIO_Pin = LED_LAT_PIN | LED_OE_PIN | LED_SCLK_PIN | LED_SDA_PIN;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(GPIOA, &GPIO_InitStructure);
GPIO_SetBits(LED_LAT_GPIO, LED_LAT_PIN);
GPIO_SetBits(LED_OE_GPIO, LED_OE_PIN);
GPIO_ResetBits(LED_SCLK_GPIO, LED_SCLK_PIN);
GPIO_ResetBits(LED_SDA_GPIO, LED_SDA_PIN);
}
int main()
{
led_init();
// 在此处添加要显示的图案的代码
// 例如:led_write(0x00, 0x00);
while (1);
}
```
在 `main` 函数中,您可以使用 `led_write` 函数来控制LED点阵。函数的第一个参数表示要写入的地址,第二个参数表示要写入的数据。此外,您还可以在 `led_init` 函数中进行引脚的初始化。
相关推荐
![pdf](https://img-home.csdnimg.cn/images/20210720083512.png)
![pdf](https://img-home.csdnimg.cn/images/20210720083512.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)